ATR headers ?

[Syclone#892]

You could also convert it to a v-band clamp. The guy I bought my headers, etc from had that joint made with a v-band, even parts of the downpipe have them. I don't know where you could get the parts though as my friend works for a racing team so he had the stuff available to him. Maybe talk to Mike lee he may know. Good luck

 

[Lynn D. Brown]

Mark,

The Pi-Thon stuff looks really good and really $$, but there does not seem to be anything to fit 2-1/4".

 

[BigAl...]

I ordered the band clamp from summit, should be here tomorow ($19 shipping on a $8 clamp :evil: ). I don't think the pi-thon will work because of the balancer (I used an ati super dampner) there's maybe an 1/8" between the crossover and the balancer. my last option will be v band, I'd have to remove the header :banghead: (powersteering pump, alternator etc...) not to mention about $100 for the clamp setup.

I'll post results once I install the clamp.

BigAl...

 

[BigAl...]

Well, I installed the band clamp as suggested from summit. It did definetely help but there is still a small leak I'm hoping it's small enough that carbon buildup will seal it. thanks to all that replied.

BigAl...

 

[GEN3Typhoon]

The cross over is not 2.25

More like 1.5 or 1.625

I can measure later...

 

[BigAl...]

Nick, are you smoking the peace pipe again? you must be talking about the primary tubes.

the crossover is 2.25

BigAl...

 

[GEN3Typhoon]

Ahhhh.... ATR

I was thinking Stock

My mistake... smoking the peace pipe sounds interesting though