Aux intercooler... worth the $$$

VinPecora

New member
that is a sick setup!! I like it!, where did you get the mounts to mount the rad like that?? and what kind of tank is that??
 

Matthew Little

New member
exchanger

exchanger

My friend works at a machine shop, so we made the mounts and the tank also. The tank holds 2 gallons and with the f2 radiator and the line I would say it added almost 3 gallons maybe more. I don't have any drag time to say the setup made me faster, but it droped my intake charge temps at the mat 15deg(under normal driving). there are three brackets, one up top in the middle and the two on the sides. The main reason I wanted the tank was to put ice in it at the track,ie filler neck on the drivers side. No cap on it right now, I had to order a high pressure one, because a 16lb kept leaking out of the over flow. I also made a ram air out of some jeep cj defroster ducts. Thanks to T66typhoon for posting the pics.
 

Matthew Little

New member
x-changer

x-changer

Yeah-yeah, I drive 45min to work one way in the country,so you know, and that has only been on the truck for 1 week.
 

sy112

New member
Yeah I used to live in Arkansas, and the old lady's sister's fiance came home with us one time. First time in the country. We were going somewhere at night and suddenly he says "Oh man, it's starting to rain" We all laugh, then we had to explain that it was just the mosquitos from the rice fields. Don't miss those days, that's for sure :lol:
 

Matthew Little

New member
xchanger

xchanger

I have a shurflo, but would go with jabsco just because of size. The shurflo is huge and the jabsco flows more. I also have a 6" fan on the lower cche. Never looked at the johnson.
 

InvisiBill

Active member
I haven't done anything with this personally, but a heatercore would make more sense to me than a tranny cooler. It's made for coolant/water, as opposed to ATF. I think it was Daron that said a rear heatercore from a Suburban had a fan builtin and worked well as a remote IC heat exchanger...
 

turbodog

Donating Member
Heater core aux CCHE procedure is here:
http://users2.ev1.net/~nolanclan/Typhoon_CCHE_mods.html

It is really hard to do before/after testing due to varying track conditions. I can say my MAT temps seem to be (again, conditions vary) about 30 degrees cooler at WOT after adding the aux CCHE and 2nd pump.

I have done some detailed thermodynamic modeling that shows the added radiator area of the heater core aux CCHE makes the system capable of sustaining a constant temp, where the stock system water temp increases 25F after one loop through at WOT.

I agree that a tranny cooler is a poor choice for IC applications. The tranny cooler is designed for higher pressure and higher temp differential. It will not transfer heat effectively when the temp diff (hot water to ambient air) is only 30 degrees or so.
 

Tooky

Serious about performance
turbodog said:
Thanks!!! The "77 Suburban rear heater" core looks to be exactly the design I was trying to find. I dont want the ugly gold color behind my grille, it looks like yours was painted black between first and later photos?? Or am I seeing things? What paint did you use and do you think it will effect the heat transfer? Thanks.
 

Daron

Active member
InvisiBill said:
I haven't done anything with this personally, but a heatercore would make more sense to me than a tranny cooler. It's made for coolant/water, as opposed to ATF. I think it was Daron that said a rear heatercore from a Suburban had a fan builtin and worked well as a remote IC heat exchanger...

Bill, diggin up old stuff! I liked the suburban rear heat setup because of the built in fan, and cuz they are easy to find in boneyards. Though I would rather have a nice motorcycle radiator since they are compact and have built in fans as well. They also have mounting provisions that make them easy to install.
Daron
 

jayzelazo

New member
Sorry, I know this is an ancient thread, but does anyone know of the part number for the Suburban heater core? I called my Chevy dealers and they say they don't exist.

thanks

jz
 

turbodog

Donating Member
The ones I used were part number 2-275, from either AutoZone or O'Reilly's. I used an Eastwood product made specifically for painting radiators that is not supposed to hurt heat transfer.
 
Top