barely made it home

too many toys

IM LOVIN IT
i was out cruising and on my way home my truck started to act funny didnt have power and kept popping back then at a stoplight it died wnd would not restart until i turned the key completely off but still when i gave it gas it would die . i managed to pedal it home got into garage and first i checked for any codes but still only got my over boost code as i have not adjusted my rod yet but as i was checking it with the key on there was a ticking or clicking coming from what sounds like inside the intake , any clues?
 

TYTILIDIE

METH HEAD
Re: barely made it home

If you had your ALDL pin in there to do testing still the noise you were hearing was your IAC motor. But other than that it could be a few things. When I have experienced that problem its been either the hose to my fuel pump inside the tfank or a bad ignition module. Can think off hand of anything else.
 

too many toys

IM LOVIN IT
Re: barely made it home

I did the bike tube test to check for vacuum leaks and found a significant one on the back of the plentom and found that the linkage pivot is where it is the worst , from other posts i have read is this my main problem . Obviously i have to replace the TB is there a good aftermarket TB available that someone has run with sucess??
 

QUICK STORM

B.A.M.F. BMW Tech
Re: barely made it home

search for 52mm TB upgrade. the guy will take your stock tb bore it out and add a bushing to it. this eliminates the vacuum leak from the tb shaft. also check your spark plug wires. if you have a hard start, i would suggest a IAC valve if you have a good charging system.
 

too many toys

IM LOVIN IT
Re: barely made it home

if you have a hard start, i would suggest a IAC valve if you have a good charging system.[/QUOTE]
what is a IAC valve? havent figuted out all the abeviations yet :tup:
 

gjp

another post whore
Re: barely made it home

this thing
Picture243.jpg
 
Top