Braided intercooler lines

[ZavzTy547]

Go to a diesel shop. They should have big enough pipe and a mandrel bender, too.

I went to shucks and bought a intake tube for a 90's civic. I cut about 2" off the tube to make it fit.

 

[vinnieTy]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

I went to shucks and bought a intake tube for a 90's civic. I cut about 2" off the tube to make it fit.

I wanted to know what braided lines are those that you have running from the intercooler into your fender. I ran 3/4 heater hose myself but i keep getting a crimp and plus i dont like the way it looks. What lines are those and where did you get them. I appreciate all the help.

 

[Flyin Ryan]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

I wanted to know what braided lines are those that you have running from the intercooler into your fender. I ran 3/4 heater hose myself but i keep getting a crimp and plus i dont like the way it looks. What lines are those and where did you get them. I appreciate all the help.

They look like braided heater hose lines to me.. and if so you can pick them up off ebay for like $35 per 10 foot I believe.. I had them on my previous mustang and looks pretty good.

 

[vinnieTy]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

They look like braided heater hose lines to me.. and if so you can pick them up off ebay for like $35 per 10 foot I believe.. I had them on my previous mustang and looks pretty good.

So 3/4 braided heater hoses that is all i need to search on ebay...okay ill try thanks.

 

[ZavzTy547]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

Yeah, it's braided heater hose, helps eliminate kinks. I bought the hose from summit.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPE-39706&N=700+115&autoview=sku

 

[jimhrabe]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

Yeah, it's braided heater hose, helps eliminate kinks. I bought the hose from summit.

http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPE-39706&N=700+115&autoview=sku

Is this the stuff to replace the stock intercooler hardlines?

 

[vinnieTy]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

Is this the stuff to replace the stock intercooler hardlines?

Yes it is. I removed the hard lines and ran 3/4 black heater hose through the fender down behind the batter to the intercooler. The problem i had was getting the 90degree bends to work without a kink but had no luck. I am going to order those lines right now. :tup:

thanks

 

[vinnieTy]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

I just order the braided lines except i went with a longer one. It seemed the price was a little better.


http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPE%2D39710&N=700+0&autoview=sku
:tup:

 

[Flyin Ryan]

Re: WTB mandrel bent air intake?

Re: WTB mandrel bent air intake?

I just order the braided lines except i went with a longer one. It seemed the price was a little better.


http://store.summitracing.com/partdetail.asp?autofilter=1&part=SPE%2D39710&N=700+0&autoview=sku
:tup:

I think I paid $36 shipped for my 10ft worth and didn't receive um for two months until I give the guy a neg feedback.. then he killed my perfect feedback score like a dick.. anyways that's a good price I may have to order more to replace my heater core lines with since the air2liquid system is getting yanked