Code 45 After Ultimate install

Dr.Evil

Addicted to Boost
I just installed an ultimate chip w/ 3 bar sensor and I get a 45 code and it runs pretty bad. I have only tried the T115 setting. The stock ECU was properly piggybacked. It is a V9 ultimate that the previous owner said was for a 92 Ty. I have a 93. would this matter? I borrowed a buddy's hypertech chip and that workes way better and I can really feel the power increase with that chip. Whats the deal w/ the ultimate? Only thing I can think of is its a 50LB injector chip and is not workin well with my stock injectors and FPR...
 

smeagol

Active member
Re: Code 45 After Ultimate install

Try and run a 50# chip with stock injectors and you will have problems.

Try running 50# injectors with a stock injector chip and you will have problems.

The injectors are just way too far from stock for either scenario to work.
 
Top