Converter Lock-Up Kits

S

stripp

Guest
What are those of you who are running aftermarket ECUs using for converter lock-up? I'm in the process of putting mine back together with a FAST system and trying to figure out who has the best kit. None of the kits I've found seem to be very complete (TCI, B&M, Painless)! Does anyone make one that includes both speed and vacuum sensing?
 

smeagol

Active member
Nope, can't do.

Best bet is the B&M kit, for non mechanical speedos. Just has s slide bar to set lockup at a certain MPH. Good for playing at the track, very easy to use.

If you are cheap, use a switch putting the TC lockup to ground, and/or use a hobbs switch that grounds it under boost for track runs :wink:
 
fyi, the vacuum only units (tci, painless, et al) SUCK!!!! i was near suicidal with one in my v8 s10 - i would use a toggle switch any day of the week over that kit. i switched to the speed sensitive b&m, and was fairly happy with it, tho i rigged in a manual control 3 pole switch as well. just stay away fromt eh vacuum only's.
 
S

stripp

Guest
Thanks for the input. Looks like I'll just order the B&M kit and give it a try.
 

Mephisto

These trucks are cursed
On 2001-12-25 10:01, Tom Servo wrote:
If you are cheap, use a switch putting the TC lockup to ground, and/or use a hobbs switch that grounds it under boost for track runs :wink:

whats the story on this hobbs kit? and i thought i read in a different post that a TC lock up switch isnt really all that beneficial with a stock tranny?
 

nightdiver

Active member
i will use the stock ecm to control the lock up
i ll connect
12+
ground,
speed input
tcc
tps signal
the buick guys do it often
if you want to change the 30 mile lock up then do it from the chip
B&M is easier to adjust if thats what you want
 
Top