Datamaster File, take a look?

Vaders Sy

Donating Member
I have recorded my first datamaster file tonight. First time recording, I thought I was breaking up the down time versus actually accelerating.

http://www.mediafire.com/?6m6gntwojm0ke2d

It looks like it needs more fuel to reduce the spark retard. I think the S term looks like lean or do I have it backwards? Towards the higher rpm's you will see more knock retard and high injector duty 115-122%. Lastly, since the EGR does not have any info, is it safe to say it has been disabled?

For what I know, it is stock except a chip (Not sure what). Kind of of scary the boost reads 15-15.2 at one point. Maybe 3 bar already?

I'm used to looking at FAST stuff, but let me know if it is setup well enough and please make suggestions.

Thanks for the input!
 
Last edited:
Re: Datamaster File, take a look?

I would look at it but I cant DL it. PM me and I will give you my email. More fuel does not mean less spark retard nessasarily. If you are lean yeah. Some times less timing and better fuel work the best. If the chip is worth anything it should not be leaning you out. If you are lean a quick fix for that would be a walbro or aeromotive fuel pump. That might help your cause.
Look in DM if your setup to reads OEM then it might be a stock map(Look under display units). Select the 3 bar option and your boost reading should be way off in the log. Just use that to see what makes sense. With that duty cylce injectors must me working hard to add fuel.
 

johnboy89

Member
Re: Datamaster File, take a look?

I was able to download it and the fueling doesn't look that lean to me. Your narrowband O2 readings look about right. The inj. DC is up, but I've seen higher and it's been fine. Your timing seems a bit high to me and I'm thinking if that was down a degree or two you might be fine? Boost control looks cyclic to me and the KR follows that so looks real.

Is your truck stock other than inj.'s?

Other than that it looks fine and I'm no means an expert either!!!
 

Vaders Sy

Donating Member
Re: Datamaster File, take a look?

I was able to download it and the fueling doesn't look that lean to me. Your narrowband O2 readings look about right. The inj. DC is up, but I've seen higher and it's been fine. Your timing seems a bit high to me and I'm thinking if that was down a degree or two you might be fine? Boost control looks cyclic to me and the KR follows that so looks real.

Is your truck stock other than inj.'s?

Other than that it looks fine and I'm no means an expert either!!!

The truck is stock, factory injectors. Thanks for the help! I'll send the file to you devil's own tonight or tomorrow. I figured those who are more skilled at looking at this data could educate me. Thanks again for the help guys.
 
Re: Datamaster File, take a look?

Looks like you have a stock MAP unless you are running over 20 psi.
Looks like you have a connection error when you have it floored.
Your boost control is bad. It looks like its because of your chip. Spark advance, spark retard and boost are all moving together. Your chip is doing a good job protecting you from blowing your motor. I also saw 7.9 deg of spark retard on that second pull. I dont like that.
On your first pull your intake temps reached 107 F.
I see this flashing DTC on all your pulls....MALF 51: EPROM/Flash Checksum Fail. I dont know what that really means.
Your engine is staying nice and cool. That is always good.
You are runnig a close loop chip.
I hope this helps. My advice would be to get some higher octane fuel. Try toro octane booster. Even better get an injection system and a tuner to help you make that KR disapear under WOT. From what my experience is pump gas really kills the performance of these trucks. Give them a tune on alky, E85, or race gas. They come alive.
 

Vaders Sy

Donating Member
Thanks

Thanks

Thanks for taking a look at the file. I also made some passes last night at the track I can post and/or email to you if you have the time to look at them.
 

Vaders Sy

Donating Member
Re: Datamaster File, take a look?

Looks like you have a stock MAP unless you are running over 20 psi.
Looks like you have a connection error when you have it floored.
Your boost control is bad. It looks like its because of your chip. Spark advance, spark retard and boost are all moving together. Your chip is doing a good job protecting you from blowing your motor. I also saw 7.9 deg of spark retard on that second pull. I dont like that.
On your first pull your intake temps reached 107 F.
I see this flashing DTC on all your pulls....MALF 51: EPROM/Flash Checksum Fail. I dont know what that really means.
Your engine is staying nice and cool. That is always good.
You are runnig a close loop chip.
I hope this helps. My advice would be to get some higher octane fuel. Try toro octane booster. Even better get an injection system and a tuner to help you make that KR disapear under WOT. From what my experience is pump gas really kills the performance of these trucks. Give them a tune on alky, E85, or race gas. They come alive.

Not sure what chip it has but, my turbotweak chip will be here Monday. Here are a few of the runs from Friday night test and tune. All are welcome to view and comment.

Mods Upcoming next week:

Electric Fans (RPM kit)
Cold air kit (RPM)
Turbotweak chip
Walbro Fuel pump/hotwire
Johnson IC pump/hotwire
AFPR
MSD Billet distributor
Changing plugs, wires, oil change, coolant flush, rear end service, and a few other things. Then back to the track.


Files for last night's runs:

first pass

http://www.mediafire.com/download/43sttbkaqk7edh8/run1.uni

Second pass

http://www.mediafire.com/download/vvy08kmvh6iyakf/run2.uni

Last Pass

http://www.mediafire.com/download/xs43dpqg4z8ktfs/run3.uni
 

Vaders Sy

Donating Member
Update

Update

Just an update.

Tach flutter showed up the next day after racing. Replaced all the tune up items for the ignition system as well as a new water pump that was leaking. Afterwards found that there was at most 1.2 spark retard WOT. Big difference. I'll swap chips to the turbo tweak and 3 bar. My thought with the spark retard in the previous night was due to faulty ignition parts.

Also, I was playing with datamaster today, using the quarter mile estimator it shows my last pass as a 13.3 with the above link.

On to the track in a week or two.
 
Top