datamaster files

willyson

trollin'
Re: datamaster files

Jimmy said:
ic pump.jpg

ahh...Underneath that is prem fuel... I'm running premium fuel... or at least I paid for it. this telling me octane rating not at premium?
 

Jimmy

Banned
Re: datamaster files

willyson said:
ahh...Underneath that is prem fuel... I'm running premium fuel... or at least I paid for it. this telling me octane rating not at premium?
I don't know what the prem fuel flag is for.

But it's not active oanyway.If it was it would be a 1 instead of a 0
 

willyson

trollin'
Re: datamaster files

SBNova said:
I still couldnt see your DM file. Maybe because I dont have DM...... A faulty IC pump *could* cause knock if your IAT's are too high. Since I couldnt see how high, I really dont know. If your getting more than 4 or 5 degrees of KR then you really should find out why and correct it. Do the basics like a tune up, get that IC pump working- try checking for voltage at the pump. It could be a bad relay. Then check for fuel pressure. Do you have a stock pump?? My pump was working fine under normal driving. It even made good pressure, and referenced correctly with boost (applied pressure to the vac port to test) but under load my Ty ran lean. When I took my pump out the sock was torn and the inlet was clogged. It probably wouldve been good enough to just clean it and put it back together but a high volume/pressure pump is a safety device in a turbo application.

I have a Walbro 255lph installed about 500 miles ago.Thought the stock pump was going bad bc it had(still has at times) a stutterstep when accelerating. Thinking its FPR going. I am planning on getting a AFPR in a few weeks. Ive done plugs, got cap and rotor to be done next week, had the intake/head cleaned.
 

SBNova

New member
Re: datamaster files

Thanks everyone I have downloaded DM. When I looked at your file I noticed that you werent at full throttle, unles your TPS is out of adjustment. The highest I saw was like 70%. I also noticed that your knock retard occured at or very near shifts. This could be false caused by a rattle, or by the change in load.

On a side note, I like the VCR type buttons on DM to review the log, but I think I'll stick to TP for my own stuff. Like anything, I guess I am just used to it.
 

willyson

trollin'
Re: datamaster files

SBNova said:
Thanks everyone I have downloaded DM. When I looked at your file I noticed that you werent at full throttle, unles your TPS is out of adjustment. The highest I saw was like 70%. I also noticed that your knock retard occured at or very near shifts. This could be false caused by a rattle, or by the change in load.

On a side note, I like the VCR type buttons on DM to review the log, but I think I'll stick to TP for my own stuff. Like anything, I guess I am just used to it.

I am staying off of WOT until I have the IC pump installed (looks like fri), thanks for the help tho. When I get the IC pump put on, I'm gonna run DM a few more times.
 

Flyin Ryan

hated cuz he drives fords
Re: datamaster files

willyson said:
ahh...Underneath that is prem fuel... I'm running premium fuel... or at least I paid for it. this telling me octane rating not at premium?

You can change all those fields.. I don't know how the prem fuel field works but it's never changed on me and i've never ran anything but 93 and up in my truck.. I'd change it to something more useful to look at
 
Top