DIY Frontmount I/C install project

schrgds

Turbos > Superchargers
Re: DIY Frontmount I/C install project

2nd gen but heres a couple pics of mine:

frontpassenger1.jpg

frt-rghta.jpg

frontpass.jpg


I removed a/c.
 

93ty475

Donating Member
Re: DIY Frontmount I/C install project

Finally made time last night to borrow my friends tig....We cut up the ebay pipes and duplicated the steel ones I had previously made as a jig....Made exact duplicates....I had 2 (complete) of six ebay jbend pipes and a few scraps left over....

S2010020_003.jpg

S2010019_003.jpg
S2010023_003.jpg
 

93ty475

Donating Member
Re: DIY Frontmount I/C install project

Also forgot to mention that I was able to ditch the "cobra elbow" in favor of a regular "90" elbow....I guess there was enough room gained here somewhere....
 

typhoon92

Donating Member
Re: DIY Frontmount I/C install project

What radiator/fan are you running Servando? Do you have an oil cooler and a tranny cooler located somewhere else?
 

93ty475

Donating Member
Re: DIY Frontmount I/C install project

Hey Sam,

Running the 86-89 corvette radiator with metal end tanks....popular radiator for the s10 v8 conversions.....you can get one at JTR for little money....this radiator core matches the ebay I/C core in width perfectly..... Fan is a volvo (bosch) recall fan that is widely available now on ebay.....I'm using the stock syty ecm to control my fan....also used the ecm to step up the IAC before the fan kicks on to prevent the voltage drop engine stall issues....works great so far....drive the truck every night....no problems as of yet..... :tup: (stain on the ground is old turbo buick sweat ;) )

S2010038_002.jpg
 

Syonara

New member
Re: DIY Frontmount I/C install project

im about 2steps from wantin to try the same IC setup--its that or a dequick duel.......
 

93ty475

Donating Member
Re: DIY Frontmount I/C install project

typhoon92 said:
Do you have an oil cooler and a tranny cooler located somewhere else?

Yes I do have both of those coolers located under the sy bed.....I wanted nothing to mix with the coolant temps.....both tranny and engine oil coolers are independent now....call me if you need more info Sam...
 

93ty475

Donating Member
Re: DIY Frontmount I/C install project

Syonara said:
im about 2steps from wantin to try the same IC setup--its that or a dequick duel.......

Remember that this ebay core is not the best core in the world.....far from it......But my intake air temps dropped over 40 degrees at wot compared to the kb underframe mount I/C I had before at the same loads/speeds.......You stand to lose a/c as well if you pipe it the same way I did....just thought I'd share pics of what I did one time.... :tup:
 

typhoon92

Donating Member
Re: DIY Frontmount I/C install project

93ty475 said:
Yes I do have both of those coolers located under the sy bed.....I wanted nothing to mix with the coolant temps.....both tranny and engine oil coolers are independent now....call me if you need more info Sam...

That frontmount looks very sharp and a very well thought out project... I was thinking of doing the frontmount also and installing tranny and the oil cooler right underneath were the RPM intercooler sits right now side by side.Thanks for all your help that you have been giving me for the past couple days!!!!!
 

Syonara

New member
Re: DIY Frontmount I/C install project

I have deleted the AC and Ive been looking over ur set up but i need specs and what u used
 

crashing_sux

Blow Me?
Re: DIY Frontmount I/C install project

That looks damn nice through the grill, too bad I'm not ready to give up my A/C yet.
 

SpoolingTurbo6

Donating Member
Re: DIY Frontmount I/C install project

Man you got alot of stuff on your plate..... let me know when you slow down.I'll send you my truck!
Tyson
 

typhoon92

Donating Member
Re: DIY Frontmount I/C install project

Servando,
I know that you posted some pictures of your tranny and oil cooler located under the truck bed ? But i can't find them do you mind posting them again?
 

93ty475

Donating Member
Re: DIY Frontmount I/C install project

Here's a pic of all the pipe it took to do my I/C system.....I have it removed for the next couple of weeks.....

DSC00016.sized.jpg

DSC00017.sized.jpg

DSC00018.sized.jpg

DSC00019.sized.jpg
[/QUOTE]
 
Top