EGT Kit

Maxtor

New member
It looks like a good unit - not sure if that price is good/bad but it doesn't seem like too much for what you get. I am also interested in buying a system to complement my WBO2.

Where would you mount the probe? The hottest cylinder is #1, but with stock manifolds it would be hard to mount the probe 2" away from #1 (not sure how you would secure the probe). I've heard several discuss mounting it in the xover pipe (close to the mounting flange on the drivers side), and several more mounting it after the turbo. I would think putting it as close to #1 as possible would be the best. Any thoughts?
 

Falco

Donating Member
Would be nice to hack the stock ECM as with the WB, so we could get the stuff in the ALDL stream too... Just a thought...

As far as mounting, I mounted mine on the downpipe near to the stock O2 bung. I was affraid to mount the probe on the header. First I didn't want to drill the headers mounted since the chip could go to the turbo. Also my EGT (Autometer) has an 1600F limit, which could be reached in our application on the hotest points. If the probe couldn't stand this heat all the time and it breaks... Well. I get max 1100F at the downpipe...

HTH,
 

Maxtor

New member
That would be awesome, being able to datalog EGT along with WBO2. Not sure how to build that kind of interface - would need to build a box to generate some kind of voltage reference signal sent to the ECM based off the variable resistance from the probe - then a "spare" tie in location to the ECM - then the code hack...... way over my head. Maybe some day the likes of Brian Green, Dig, Barry Tisdale.... could pull something like this off??? Wouldn't know where to start without doing a lot of research.... Great concept, though.

We have done a LOT with tuning - more to come I'm sure thanks to these guys.
 

kwick6

Donating Member
I have the autometer EGT on my truck. Its not been an extremely useful yet. I have the probe on the downpipe after the turbo, and its just not given me much as far as accuracy of the tune.

You can be lean, get really hot exhaust temps, then you can also run to rich and get hot exhaust temps as well. It may become somewhat useful someday, so I'm leaving it in. It is nice to know how hot your running and how close your getting to the thermal limits of your engine. :eek:

Scott
 
Top