Fitting for fuel lines

[Andreas]

I've been reading thru post here and couldn't find anyone that found a femalefitting to delete the "rubber" lines that connects to the tank (use the stock male fitting on the hanger pipes). See picture in link below, marked with a circle.
http://images.northeastsyty.com/files/fuelfittings.jpg

You who have replaced your fuel lines with braided hose all the way have you cut the rubber lines and put in a socketless hose end (http://static.summitracing.com/global/images/prod/large/aer-fbm1512_w.jpg) and from there run braided hose to the AFPR?

I have not taken down the fuel tank yet.
I found this picture in my search. Whats the hose marked with an arrow for?

http://images.northeastsyty.com/files/fuelfittings.jpg

 

[CKEITH]

Re: Fitting for fuel lines

earls sells them.feed line is a 16mm 1.5 saginaw part # 9894dbjerl

return is a 14mm 1.5 saginaw part#9894dbherl

hope this helps.

 

[Andreas]

Re: Fitting for fuel lines

Thanks

Found them! Summit has the wrong pictures but the right description and part#

14mm - 6an http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR-9894DBHERL&N=115&autoview=sku

16mm - 8an http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR-9894DBJERL&N=115&autoview=sku

 

[sleepy]

Re: Fitting for fuel lines

Also - the hose marked with the arrow is the emission vapor vent hose.

 

[Andreas]

Re: Fitting for fuel lines

Thanx Sleepy.

 

[Loeryder]

Re: Fitting for fuel lines

Thanks

16mm - 8an http://store.summitracing.com/partdetail.asp?autofilter=1&part=EAR-9894DBJERL&N=115&autoview=sku

That should be 16mm - 6AN.
I am not seeing a female 16mm saginaw to 8AN.