fuel pump

92 Ty 1173

92 Ty 1173

Active member
Re: fuel pump

Just did mine this past weekend. The hardest part is getting the tank back in place and starting the fittings. I left alittle gas in the tank and after cleaning the opening dumped all the crap out of the tank. Also for the future make sure you anti-seize the shit out of the lock ring and the fittings. I painted what I didn't anti-seize. Also if you don't have one already get an adjustable regulator and put that in right away. Atleast your fuel system will be good to go.
 
M

MySaudi

New member
Re: fuel pump

i was gonna do mine today.. BUTT my strap broke on the tank then i took a look at the sending unit and yea it didn't look to pretty there was rust going up to the hose, and i could litteraly take chunks of rust off the sending unit.:rant: . so i figured wait till winter store the truck and get all new parts for it so its ready for next summer..
 
B

BacDoc

New member
Re: fuel pump

Syclone027.jpg


The hardest part was getting the hard lines undone. Overall it wasn't bad.
 
M

MySaudi

New member
Re: fuel pump

well see my truck dont look all that clean, nor does my garage floor. last time i tried to get the tank out i broke the strap.. i will need to get new straps someday anyway.. but where shal i get those?.
 
B

BacDoc

New member
Re: fuel pump

There was some rust but not much. I lubed the bolts up the night before just in case.


And if you have a garage floor and haven't coated it yet....ask for a kit for Christmas. It is the best thing I have every done for my garage.
 
You must log in or register to reply here.
Top