god damn ignition

cloneman315

Active member
ok guys please help as i am getting more grey hairs by the day. I bought this truck like 3 months ago from a guy who didnt beat or really maintain it so i have been doing all the basics but still have the miss fire or arching of the wires under the hood. How do i run them or what can i do it is giving me like 7 knock retard i think not sure could it be the fuel pump? I have so far put pit bull chip 160 stat new plugs conrad cap rotor complete gm distibutor magnacore wires and complete msd ignition system. also tec and fuel injector cleaner i run 94 with 108 octaine attive.How hot should my iat temp be? also the stock fuel pump would this cause the knock retard i have a new walboro just need to put in what should i set my pressure at thnaks guys.Brian should of kept my cobra berg
 

BillC

New member
Unfortunately, with all the stuff you've thrown at the truck, it's kinda hard to tell what's going on. Time to go back to the basics, so you can get a good baseline.

First, put the stock chip back in. If you don't have one, buy or borrow one.

Second, disconnect the MSD and reconnect the stock ignition components.

Third, check the plugs. They should be AC CR42TS or NGK UR5 (or UR6).

Fourth, check the wires. If you have any arcing, replace them. Wire routing is pretty flexible, just make sure the can't touch anything hot like the exhaust manifolds or the downpipe.

Fifth, check your fuel pressure. It should be about 43 psi on the stock chip with the vacuum line pulled from the FPR and plugged (this is base fuel pressure). Then, put a mighty-vac on the FPR and make sure the pressure rises or falls 1 psi for each psi of pressure or vacuum (if it doesn't, FPR is bad). Then, take the truck for a drive with the fuel pressure gauge mounted so you can see it, and make sure the pressure still rises with boost (if it doesn't, fuel pump is bad).

This'll give you a good baseline, either for further diagnosis or (if the truck is fixed) more modifications.
 

bdubb

I am teh kingpin!
Re: god damn ignition

cloneman315 said:
ok guys please help as i am getting more grey hairs by the day i bought this truck like 3 months ago from a guy who didnt beat or really maintain it so i have been doing all the basics but still have the miss fire or arching of the wires under the hood how do i run them or what can i do it is giving me like 7 knock retard i think not sure could it be the fuel pump stock ?i have so far put pit bull chip 160 stat new plugs conrad cap rotor complete gm distibutor magnacore wires and complete msd ignition system als tec and fuel injector cleaner i run 94 with 108 octaine attive.how hot should my iat temp be also the stock fuel pump wpuld this cause the knock retard i have a new walboro just need to put in what should i set my pressure at thnaks guys.Brian should of kept my cora berg


Keith said:
r u drunk?
 
Top