intake manifold

D

Damian

Member
Can someone please post up some pics of their stock lower manifold? Im trying to figure out where some of the studs went. I took pics before I did the tear down, but my phone is MIA. I just need to know where the bolts go, where the studs go and where the brackets go. You can also email them to me if you need to (meclipsegt@yahoo.com).

Thanks in advance.
 
S

SYCLONE123

Banned
Re: intake manifold

Damian said:
Can someone please post up some pics of their stock lower manifold? Im trying to figure out where some of the studs went. I took pics before I did the tear down, but my phone is MIA. I just need to know where the bolts go, where the studs go and where the brackets go. You can also email them to me if you need to (meclipsegt@yahoo.com).

Thanks in advance.
Click to expand...

if no one responds i can take some pics and upload them later on today
 
D

Damian

Member
Re: intake manifold

Thank you, helps me out quite a bit. I have 2 brackets that I cant remember where they go, Ill put up pics of them later.
 
D

Damian

Member
Re: intake manifold

Thanks for the pics. Got it all bolted up now.

Anyone know the size of the turbo coolant nipple that goes into the intake manifold? The 90 degree one? My stock one was all ate up and I lost it when I moved.
 
D

Damian

Member
Re: intake manifold

On the passenger side of the engine, there are 3 plugs. One goes to the boost controller, and one goes to the a/c compressor. Where does the 3rd one go that has 2 prongs that go into it?? I cant find anything that Im missing.

Im also having problems starting the engine. It cranks over just fine, but wont fire up at all. Ive checcked the plug wire order so many times, Im sick of looking at plug wires. The only thing Ive changed is all of the ground wires on the back of the heads, I now have them on the intake manifold studs. I dont know if that would cause anything, everything is still grounded that needs to be. I have a StreetFire ignition and it wont start with it hooked up or without it hooked up. Any ideas?
 
D

Damian

Member
Re: intake manifold

I also dont have the water pump and heat exchanger put back in the car yet, I doubt that would do anything?
 
T

TurboTYPHOON

New member
Re: intake manifold

Damian said:
On the passenger side of the engine, there are 3 plugs. One goes to the boost controller, and one goes to the a/c compressor. Where does the 3rd one go that has 2 prongs that go into it?? I cant find anything that Im missing.

Im also having problems starting the engine. It cranks over just fine, but wont fire up at all. Ive checcked the plug wire order so many times, Im sick of looking at plug wires. The only thing Ive changed is all of the ground wires on the back of the heads, I now have them on the intake manifold studs. I dont know if that would cause anything, everything is still grounded that needs to be. I have a StreetFire ignition and it wont start with it hooked up or without it hooked up. Any ideas?
Click to expand...

Coolant temp on the intake manifold. Courtesy of GNNorthwest :tup:http://www.gnnorthwest.com/node/226
 
D

Damian

Member
Re: intake manifold

It didnt even come close to fitting the plug. The plug for the temp sensor came off of the drivers side and came around. I ordered a new temp sensor, maybe its the wrong one? If thats where it goes, where do the one I plugged into it go? This is why I wished I knew where my daughter put my phone with a dead battey.
 
T

TurboTYPHOON

New member
Re: intake manifold

Damian said:
It didnt even come close to fitting the plug. The plug for the temp sensor came off of the drivers side and came around. I ordered a new temp sensor, maybe its the wrong one? If thats where it goes, where do the one I plugged into it go? This is why I wished I knew where my daughter put my phone with a dead battey.
Click to expand...

I could be wrong won't know for sure until I look tomorrow. You have the one in the drivers side head?
 
D

Damian

Member
Re: intake manifold

I forgot about that one. Ill look at it tomorrow. Maybe they sent me the wrong sensor for the coolant.
 
You must log in or register to reply here.
Top