Motor mounts

[DRUNK411]

Will these motor mounts work on my Ty or should I get another brand? Or style?

http://www.jegs.com/i/Moroso/710/62510/10002/-1

 

[Tommyquest]

Re: Motor mounts

you want 710-62500

 

[BoostedSUV]

Re: Motor mounts

you will need to change the frame pads as well. They will not work with the stock Sy/Ty ones. RPM sells a nice set of fabricated frame pads that will work with sbc solid motor mounts

 

[DRUNK411]

Re: Motor mounts

If I go with part number 710-62500 do I stll need the pads from RPM?

 

[Don W.]

Re: Motor mounts

Yes. You need both halves so-to-speak. Frame and motor.

 

[BoostedSUV]

Re: Motor mounts

RPM sells the pads and mounts as a kit. That's your best bet...

 

[Don W.]

Re: Motor mounts

This might help. See post #8

http://www.syty.net/forums/showthread.php?t=48497&highlight=mounts+lower

 

[Tommyquest]

Re: Motor mounts

If I go with part number 710-62500 do I stll need the pads from RPM?

I run mine with JSM pads from Turbotime. I don't know if they still sell them though.

 

[dgoodhue]

Re: Motor mounts

I run mine with JSM pads from Turbotime. I don't know if they still sell them though.

Yeah, I don't know if JSM still makes the pads, but he did all the development on the frame pads.

 

[DRUNK411]

Re: Motor mounts

I can not get the site to work for RPM, does anyone else have this issue?

 

[Don W.]

Re: Motor mounts

Mine came from Turbotime as well. Reason for that decision was the frame pads have slotted holes which helps allot if there is any misalignment.