Need a little Help

svt4blood

New member
When I get on my Ty @ 35-45 mph max boost which is about 13-15 psi according to the in dash gauge it cuts out ... And when I say cuts out I mean Dies.... Doesn't shut off just cuts out.. I don't have a code reader.. If anyone has a little insight that would be great... I going to put a fuel gauge on it to see if the pump just can't keep up any more... Or could it be the map sensor ..... Truck is all stock except for no cat and 3" exhaust... No tuning or chip..... Also has 38k Moderate throttle it runs just fine... Thank you
 

neildemo

Administrator
Re: Need a little Help

Stop Boosting you will blow up your engine. Thank god your computer is cutting off fuel supply! or you would have tanked your motor. I had similar problem You have a bad hose on your boost solenoid. causing you to overboost replace all your Hoses. Call Tom from Sportsmachines. I suggest you quit getting on it you will have a dead Ty. Good Luck.
 

svt4blood

New member
Re: Need a little Help

So whats the answer... Problem is there is not a whole lot of tuners in South Fl. Is there a fix other then doing your own tuning... Will the 3 bar map sensor do the trick
 

nonova0074

Member
Re: Need a little Help

no a 3bar wont do crap without a chip, contact turbo tweak for a chip if you are not a self tuner.
 

sytyguy

Moderated User
Re: Need a little Help

Just spoke with Dean. I'm going to try to dial in his WG settings with a new chip.
 

vinnieTy

TY # 1889
Re: Need a little Help

So whats the answer... Problem is there is not a whole lot of tuners in South Fl. Is there a fix other then doing your own tuning... Will the 3 bar map sensor do the trick

The boost solenoid is either bad or just a bad vacuum line to it. Do a search for "Boost Solenoid" and read where it's located and look it over. There needs to be vacuum lines to it. Also be careful the computer is doing what it needs to do to be safe but don't keep taking the chance.
 

WyoSyclone

Active member
Re: Need a little Help

Just spoke with Dean. I'm going to try to dial in his WG settings with a new chip.

Hey Michael,
The tune I did for Sean's Ty should work great... exactly the same mods. Let me know if you'd like to try it.. i can email it over.
 
Top