Need help from experienced owners

Jeasen

Member
Re: Need help from experienced owners

Powercat6, that is the truck I have. I was told that the motor had some internal mods but I never really got a good answer. I tried to contact the Oklahoma owner but struck out and could not find him. Does anyone know the history of this truck? Thanks, Jeasen
 

Jeasen

Member
Re: Need help from experienced owners

I am having a little trouble with doing the compression check. I cannot find the compression gauge that I wanted to use. It seems that I loaned it out and it never came back. I am going to try to use another gauge that I have but as you all know this is not an easy task.
I will report the results as soon as I have it.
 

Jeasen

Member
Re: Need help from experienced owners

Johnboy89, I sure hope that my motor does not look like yours did. In all my years of messing with cars I have never had one come apart like that. But there is always a first time for everything.
 

Jeasen

Member
Re: Need help from experienced owners

Compression test complete. First I need to apologize to the person that borrowed my compression gauge. I found it put away in the wrong place by me. Sorry, I take back the things I said about you.
Now remember, the intake is off and the motor was not restarted since the white smoke screen.
#6, spark plug dry and a dark tan color, compression 130#
#4, spark plug wet and a dark brown color, compression 145#
#2, spark plug wet and black, compression 55#
#1, spark plug wet and electrode bent, compression 65#
#3, spark plug dry and a dark tan color, compression 120#
#5, spark plug wet and a dark brown color, compression 160#
I checked the #1 spark plug when I set the timing and it looked fine and the electrode was not bent so it appears that a part of the #1 piston came apart and hit the spark plug. Also something is wrong with the #2 cylinder.
What should I do next? My thoughts are to pull the motor so I can work on it more easily. Can I remove the exhaust manifolds from the heads and leave the exhaust system in place? Thanks, Jeasen
 

vmack

New member
Re: Need help from experienced owners

I don't think the manifolds are going to stay put, I would take the turbo and all that crap off if u wanted to do it in the truck.
 

randy merritt

Donating Member
Re: Need help from experienced owners

Sorry man, that is not good. Your first purchase should be the sy/ty offical cd-rom, which has all the manuals and supplements in digital form. Next, buckle down and pull the motor. It is going to suck, but it is not quite as bad as it looks (although it is bad). Do lots of searching for how-to's of pulling motor. I pulled mine with the trans left in the truck.
 

Jeasen

Member
Re: Need help from experienced owners

Powercat6, yes from the description that is my truck. That post from Forsyth, Missouri goes back to 2008. If it had a 142,000 miles then it has moved less than 2000 miles in 4 years. It now has 143,700 miles. Very interesting. Thanks for passing that post on, it helps me to understand what I am dealing with.
I noticed that the pistons are hyperutetic according to that post. From my TurboBuick days I was always told that they were not the piston to use with boost. What have you guys been doing for pistons? Seems like I will be needing some .030 over pistons. Anybody have some that they do not need?
 

Jeasen

Member
Re: Need help from experienced owners

Well I took a look at pulling the engine and it looks like it is not going to be easy. No room to do anything. O well, I guess I will stop complaining and start working. I will let everyone know what I find.
 

Jeasen

Member
Re: Need help from experienced owners

I just thought I would thank everyone for their comments, help and suggestions. I have not made any progress on removing the motor. I am still trying to get myself worked up for the task. I will let everyone know what I find once it is removed and I have it tore down.
I am probably going to need a new block and possibly heads. All that white smoke has to be more than a head gasket failure. I would like to build a motor I can depend on. I see that stock bottom ends are surviving down into the elevens. I think I will go to forged pistons. What would be a good rod to use? Assuming the crank is still good I will probably reuse it. Thanks again everyone.
 

Jeasen

Member
Re: Need help from experienced owners

Well I have been down with a bad back and have not been able to do anything with my Typhoon. I had a procedure done on my back and I am starting to feel better. It is about time to get back to the Typhoon.
I have been looking for a good 4.3 motor to rebuild and ran across a Syclone motor that was installed in a two wheel drive Blazer. The motor looks complete but has no starter so I can not hear it run. The Blazer is totally shot and all rusted out. Few good parts there but I was wondering what you guys thought the motor is worth. I am aware that it is probably just another boat anchor like the motor I already have but I would probably be willing to take a gamble for the right price. What do you guys think it is worth?
Thanks in advance for your opinions.
 
Top