quick answer ultimate question

AlaskaTy

New member
Okay, so the ultimate has settings ranging from 15 to 22 and T1-T3. I also know it doesn't have any boost control, so here's what I told myself: The T1-T3 settings are for timing, T1 (stock like) to T3 (agressive timing) and the 15 to 22 would be fueling curves to the corresponding boost levels. It's really the last part that I have a question about.

Fact: I have horrible boost control with the ultimate

Fact: stock wastegate is sh*t

I'm looking for possible solutions, and am really thinking about getting an external wastegate.

Would I also need a manual boost controller to get rock solid boost control or would the external wg be enough.

TIA
 

jwaller

Evil Genius/SyTy Guru
Re: quick answer ultimate question

AlaskaTy said:
Okay, so the ultimate has settings ranging from 15 to 22 and T1-T3. I also know it doesn't have any boost control, so here's what I told myself: The T1-T3 settings are for timing, T1 (stock like) to T3 (agressive timing) and the 15 to 22 would be fueling curves to the corresponding boost levels. It's really the last part that I have a question about.

Fact: I have horrible boost control with the ultimate

Fact: stock wastegate is sh*t

I'm looking for possible solutions, and am really thinking about getting an external wastegate.

Would I also need a manual boost controller to get rock solid boost control or would the external wg be enough.

TIA

your boost control has nothing to do with the ultimate it has to do with your crappy WG and it's poor design and size.

if it's that bad then do an external. their are about 3k differnt posts on this board from ppl using and installing external wg's
 

AlaskaTy

New member
yeah, per fact number two I recognized that. I was curious if I needed a boost controller as well as the external wg.
 

kwick6

Donating Member
AlaskaTy said:
yeah, per fact number two I recognized that. I was curious if I needed a boost controller as well as the external wg.

if your going external, you'll need to use a boost controller... be it a simple regulator or a high dollar blitz.

its a matter of what you want to spend.

Another way is to have the chip control it, using the stock solenoid. That would obviously be custom work that you'd have to do yourself, or find someone that will (agian...depends on what you want to spend) :wink: .
 

AlaskaTy

New member
Thanks for the replies. I was afraid that I'd have to spend a grand on boost control...My parents always tell me to sell the ty they call it a "money pit," but that's not true a pit impies there's a bottom :D
 

Sy769

Donating Member
Depends on what you define as good boost control.

I have no muffler after the cat and use a manual controller. I get about a 1-2 psi spike on a downshift then it settles down relatively steady.

If you want to run with no cat then you are gonna have to do something.

Depends on the version of the ultimate. The 50lb. version for stock motors has good boost control on a local truck with a PTE60 out of the box.
 

AlaskaTy

New member
I have ATR's 3" cat back w/ muffler and cat. I'm gonna be leaving the cat on for sure, the muffler may or may not get the sawzall treatment. I have the 50# chip for L35's and I still have the stock turbo. I have to get some work done on my engine here shortly, and I've been blessed/cursed with the mentality of "while I'm in there..." so I figured welding on an external would make sense at that point.
 

ty1548

Member
Re: quick answer ultimate question

AlaskaTy said:
Okay, so the ultimate has settings ranging from 15 to 22 and T1-T3. I also know it doesn't have any boost control, so here's what I told myself: The T1-T3 settings are for timing, T1 (stock like) to T3 (agressive timing) and the 15 to 22 would be fueling curves to the corresponding boost levels. It's really the last part that I have a question about.

Fact: I have horrible boost control with the ultimate

Fact: stock wastegate is sh*t

I'm looking for possible solutions, and am really thinking about getting an external wastegate.

Would I also need a manual boost controller to get rock solid boost control or would the external wg be enough.

TIA

Were did you get this chip from and did it come with instructions? You say "I also know it doesn't have any boost control", well it does, that's what the 15-24 represents. What adjustments have you made to your wg rod? Most people have gotten pretty good control by making a few adjustments. A few have wastegate issues beyond the ability of the chip to control boost well it seems. I personally have yet to work on a truck that I could not adjust for decent control.
 

InvisiBill

Active member
kwick6 said:
if your going external, you'll need to use a boost controller... be it a simple regulator or a high dollar blitz.

That's not entirely true. If the external wastegate has the same base boost as the stock wastegate, you can simply run the vac line to the new wastegate instead of the stocker. Ideally, you want the base boost as close to your target boost as possible, so this isn't the "best possible" setup. If you did this, you would basically just be curing the inadequate flow problem of the stock wastegate, by replacing it with a higher-flowing, but similar-characteristics external. You shouldn't get the nasty spikes (especially with a removed exhaust) that the stocker has. It would basically work just like the stocker theoretically should.
 
Top