blk00z28
Forced to by choice
Spotted this little article in the newest GMHTP. (page 52, 2006 Best new Products)
I'll copy what it says word for word.
First, will these heads work for us? Second would these heads be better then a stock Vortec head if they will bolt right up? Flow more/less, cost more/less?
I'd assume we'd still need to redrill them for our intakes too right? If I spelled anything wrong sorry. The link in the quote does bring you to their page, but I couldnt find anything on these heads yet. Then again, I didnt spend a hour on the page looking either. So they might be on there. :dunno:
I'll copy what it says word for word.
RHS GM VORTEC STOCK REPLACEMENT
Want to talk cylinder head options for TPI's? Take a look at RHS's new ported Vortec iron heads (PN 22364994906HP), which are drilled to fit either the Vortec intake or the stock-style TPI intake. The Vortec heads feature specially designed 170cc ijntake runners and 64cc combustion chambers for increased fuel atomization and performance. Large 2.02 intake and 1.60 exhaust valve sizes should significantly increase flow, and bronze valve guildes are perfectly suited for higher lift cams. These heads are available as a fully machined bare casting for only $289 apiece. Another version is also available, which vits only the Vortec manifold (PN 2236494906) for only $244 each. However, this version has 1.94 intake and 1.50 exhaust valves, which should give enough clearance for the 305's small bore. COMP Performance Group, 3406 Democrat Road, Memphis, TN 38118; 877-776-4323; www.racingheadservice.com
First, will these heads work for us? Second would these heads be better then a stock Vortec head if they will bolt right up? Flow more/less, cost more/less?
I'd assume we'd still need to redrill them for our intakes too right? If I spelled anything wrong sorry. The link in the quote does bring you to their page, but I couldnt find anything on these heads yet. Then again, I didnt spend a hour on the page looking either. So they might be on there. :dunno:
Last edited: