RPM CAI Install

92TyLA

New member
Re: RPM CAI Install

Wow....Brother stole the TY - that could have turned out bad for you (and him). Thank goodness they both came back in one piece.

It is a nice kit. I will be glad to get that stock crossover pipe off before it kills another turbo.

Yeah I was so pissed even my lil brother was mad, he sent me this and told me "LETS GO GET HIM" (hope I dont get heat for the pic)

in second thought
2011-07-29222002-1.jpg
 
Last edited:

92TyLA

New member
Re: RPM CAI Install

the only extra thing I did to the intake pipe was I polished it up to a mirror finish

Nevet seen one, any pics??

I know mine looks dirty as hell but I must add that I painted it flat grey as well as the throttle body top plate, but paint fell off in pieces when I power washed the engine, it lookd cool how mike sells it though.
 

MAK

New member
Re: RPM CAI Install

The install went good. I did not get to remove the metal "T" below the IC and re-route the PCV from the throttle body into the valve cover (wherever it is?). I will do that when I change out the intercoolers. Nothing came up to speak of. I was having so much fun I even installed the vac line kit. The truck idles near perfect now.

Now I just need to figure out if I have a overboost or detonation issue. I will save that for "Engine Tech".

Thanks again for the input.
 

MAK

New member
Re: RPM CAI Install

I forgot to mention....I ended up with clear plastic "T" that was not used. Any idea what this is about? Anyone? I sure hope it was not important.....:squint:
 

nonova0074

Member
Re: RPM CAI Install

I forgot to mention....I ended up with clear plastic "T" that was not used. Any idea what this is about? Anyone? I sure hope it was not important.....:squint:

You run that w the upper cac overflow line, I didnt receive instructions either
 

MAK

New member
Re: RPM CAI Install

Most of it was pretty straight forward but instructions might have helped a tad....

Stupid question for you NONOVA0074 - You say it the "T" was for the CAC overflow? What is a CAC? I am not familiar with all of the abbreviations just yet.
 

powercat6

Active member
Re: RPM CAI Install

Stupid question for you NONOVA0074 - You say it the "T" was for the CAC overflow? What is a CAC? I am not familiar with all of the abbreviations just yet.

CAC is Charge Air Cooler. The charge air cooler is the stock Garret upper intercooler that is attached to the throttle body and turbo outlet.

There's an overflow hose that runs from the CAC cap to a plastic fitting on the radiator overflow tank.
 

MAK

New member
Re: RPM CAI Install

Thanks POWERCAT. So why the "T"? If the line runs from the CAC to the overflow bottle, what else is connected to the "T"? This is were instructions would have been handy......:banghead: I could have spared everyone from having to see all of these questions.

I could swear I read somewhere that the line was not needed from the CAC to the overflow bottle. It did not make sense to me as I figured there could be coolant release under hard driving.
 

92TyLA

New member
Re: RPM CAI Install

The way I have it is...one side from the t goes to the radiator...the other to the cac and the side that points down goes to the can.
 
Top