Strokerkits dot com?

S

Sy769

Donating Member
Wow never heard of that place. They are only 45 minutes from my house

Stroker would be cool. The price would have to be right though.
 
9

93ty475

Donating Member
it's been mentioned here a few times in the last three years...i remember it mentioned in a post where the sandman was trying to get dennis to modify (stroke) our stock cranks or something like that....also, the famous "syclonefrankie" posted the link about a year ago when arguing with someone about building motors....mike lee could get you more than fixed up i bet...
 
Try Me

Try Me

New member
Yea, i will see what they say if they reply to my inquiry. I am pretty sure i am going to go with the 3.75 stroke billet from rpm since i can reuse my oliver rods and they have a good price on the je pistons i would need. I had what i believe was an injector failure and lost #1 piston to some detonation and am now ready to build my bowtie and slap it in. According to gm i should have a 302 inch v6 when im done :D . that should spool my t72 pretty good i hope. Then later when my bank account has recovered :eek: ill get my 18degrees ready to go on.
 
Richie Rich

Richie Rich

New member
StrokerKits.com

StrokerKits.com

I have spoke with them. They are nice guys. Fair price. I didn't buy a kit from them yet. Their price is fair. The crank is Scat and cost from 1800 - 2000 from most people that sell them. The cost is so high because Scat builds per order on them. If you think they might do a discount on a GP count me in.
 
myclone

myclone

Donating Member
10secTY said:
I bought a crank from these guys. The crank is made by crankshafts specialties. It is a 3.75 strock billet even fire set up with 2.10 rod pins so you can use off the shelf small block chevy 6" rods.

pics are here http://turbov6.turbogm.com/CanadianSyTy/images/Bigger Dog build up/

Customer service was very good and quality on the crank is awesome.

Nolan
Click to expand...

Hey Nolan,

Can you throw a ball park price figure for the crank you bought out there? Itd be nice to be able to use a bunch of SBC rods I have laying around instead of letting them collect dust on the shelf.
 
ghettosled

ghettosled

SYTY SUPERSTORE
Re: StrokerKits.com

Re: StrokerKits.com

Richie Rich said:
I have spoke with them. They are nice guys. Fair price. I didn't buy a kit from them yet. Their price is fair. The crank is Scat and cost from 1800 - 2000 from most people that sell them. The cost is so high because Scat builds per order on them. If you think they might do a discount on a GP count me in.
Click to expand...

the scat 4.3 v6 cranks are around $2500-$2600. They are the worst when it comes to an honest timeframe. I have had mixed reveiws with crankshaft specialties.. Last stock stroke crank i got that came from them was supposevely a "billet stock replacement" however after i had the rotating assembly balanced with 5.7" rods i went to assemble the motor and the bottom of the piston locked up on the counterweight. Had to re-grind crank and re-balance everything. Talk about an expensive crankshaft after all was said and done.
 
G

GM TURBO

Sell Out
Got a reply back...

$2050 for the crank.

4.3 crankshafts are custom made Steel Billet and take anywhere from 8 to 10 weeks to build. The crankshafts alone are $ 2050.00 and can be made with any stroke or rod size you choose. These crankshafts are not started on until they are paid in full.

Please don't hesitate to contact me with any further enquiries you may have.
 
Try Me

Try Me

New member
Here is the exact email response i got back. If nothing else at least they took the time to reply :wink:

I am dropping my block off this week at the machine shop for its prep and am hoping to be ordering the crank at the end of this month. 8-10 weeks is a long wait, so i dont know who the crank will come from.

Tom,

Thank you for your interest in www.strokerkits.com the 4.3 crankshafts are custom made Steel Billet and take anywhere from 8 to 10 weeks to build. The crankshafts alone are $ 2050.00 and can be made with any stroke or rod size you choose. These crankshafts are not started on until they are paid in full.
Please don't hesitate to contact me with any further enquiries you may have.

Many Thanks,
Jason / Technical Sales

Allied Motors, Inc.
700 First Capitol Drive
St.Charles, Mo 63301
www.STROKERKITS.com
Tel: 636-946-4747
Fax: 636-946-5757
alliedmo@swbell.net
 
S

Sy769

Donating Member
Ya know somtimes when I think of dropping 2k on a v6 stroker crank the non-purist voices in my head start talking. They ask why spend 2k on a v6 stroker crank when you can build a nice stroker v8 for the same total cost?In some cases less. There is a great supply of parts including any possible FI intake you would want to use,very affordable aluminum heads that work great out of the box...etc etc.

Then the purist speaks up and reminds me of that look on the Mustang drivers face when he sees those 6 spark plug wires..... :rotf:
 
You must log in or register to reply here.
Top