Success...somewhat

IRISHTY

New member
Well after fighting my APU-1 and TurnerPro to make them work I finally had some sucess this weekend. Since I bought these products in March/May I have had 0 luck in connecting and datalogging. Even used a computer my son had from around 02 w/datamaster already on it and up and running. Still no joy. So I....

Sent my laptop in and had it checked out.

Removed, cleaned up all grounds I could find.

Re-wired a second ALDL plug directly to the ECM.

Sent my laptop in for repair before I skipped it across the river. 2nd time.

Changed out my ECM for a loaner. Thank you Steve. Chest Rockwell. Mine was OK.

Changed my mind about code58. Decided to just do code59 and be done with it.

Wired the WB02 to the ECM.

Ran TP on my desk top pc and tried to down load bins, XDF's and ADX. That was fun cuz I could dl on my pc but not on my laptop. Finally got that figgered out. Old laptop. Thanks guys for the codes.

While I was there (under the dash) I removed about a bizillion scotchlocks on various wires.

Ran a couple of new grounds.

Then hooked it up and guess what...didn't work. Dumbass me I forgot to (this time) to upload bin to emulator....duh.

TA DA. Sucess. I'm in the process of tuning idle in and out of gear and slow speed 40/50 or so driveability.

I find it very enjoying to do this. Instant gratification on changes. like it.

I will say NONE of my remarks have anything disparaging towards TunerPro or Moats in any way. The information, well some of it anyway, is around. Its just up to us, the users, to find it. Also I would like to thank the people who helped me in answering some of my questions. As I know now I had, for the most part, it right. Was just fighting to many gremlins in my truck and my puter.

Oh and thanks to Hood for his videos. Came at just the right time.

Now i'm trying to get autotune to work for me. Can;t get my files to paste. Using it thru Microsoft Office.

Thanks again, Dan.
 
Top