Syclone #560 Rebuild

Tony Dipatri

New member
The Syclone rebuild is almost finished and ready to go into the truck.. I have several minor modifications, 36LB injectors and a 20G Garrett/ with ATR 3" down pipe and an ATR wastegate. There is an adjustable fuel regulator and a performance Fuel pump.

I live in South Jersey and am thinking of going with the Code 59 tuning. My first option is to find someone local that can tune.

If there is anyone local and is willing please reply to this.....

Thanks

Tony
 

QWERTYphoon

Motley Driver Award 2009
Re: Syclone #560 Rebuild

You might want to get some #65 motron injectors, very easy to tune. Tons of guys on east coast who can tune. Maybe even some #50's. Are your injectors ford red tops?
 

dgoodhue

BuSTeD 4.3
Re: Syclone #560 Rebuild

If your going to spend the time tuning the truck get bigger injectors than 36#, you going to run out fuel with them and 20G.

How are you going to use a ATR downpipe with a 20G? Typically 20G use the stock DP. Do you have a 20G wheel stuffed into a different turbo than the stocker? ATR DP are for Buick turbo's and the 3-4 Adapter.
 

dgoodhue

BuSTeD 4.3
Re: Syclone #560 Rebuild

I have Garrett Turbo with a 3 to 4 adapter. This came right off the Syclone turn key I purchased. It is a Grand National setup.

I guess 65LB injectors are ok?

Thanks

Tony
http://s754.photobucket.com/albums/xx181/MCASHIZ/?action=view&current=IMG_1433.jpg This thing is huge compared to the stock Turbo
Here is the turbo maybe bigger than 20 but not sure

Thanks

Yeah that is not a 20G turbo. Even more so you need bigger injectors to fuel it. I would do the 65 injectors if your buying new injectors, unless you have something else that is laying that is bigger than 40#'s.
 

Sportmachines

Active member
Re: Syclone #560 Rebuild

I would recommend the 60# injectors. Great tunability and readily available.

We stock the injectors, and can help you with tuning as well. You know how to reach us. Glad to hear the truck is coming together so quickly.
 

Tony Dipatri

New member
Re: Syclone #560 Rebuild

I just have a set of Green stripes and a stock set laying around.. I am not sure what the LB the Green stripes are......So I guess that 60 or 65 LBS are good then...I was thinking that is may be a much bigger expense trying to fit this Turbo set up with exhaust work or just sell it and purchase a direct bolt on turbo...... I do have 2 of everything motor and exhaust wise....I can return to any stock setup.

Thanks

Tony
 

0966Sy

Code what?
Re: Syclone #560 Rebuild

If your going to spend the time tuning the truck get bigger injectors than 36#, you going to run out fuel with them and 20G.

How are you going to use a ATR downpipe with a 20G? Typically 20G use the stock DP. Do you have a 20G wheel stuffed into a different turbo than the stocker? ATR DP are for Buick turbo's and the 3-4 Adapter.

So the ATR DP and header's will not work with a PTE exhuast housing/ T3 turbo?
 

Tony Dipatri

New member
Re: Syclone #560 Rebuild

The down pipe and turbo setup that I purchased came from a syclone.

I noticed that the ATR wastegate doen not have a seat in it...I guess the previous owner had it apart, now I will be needing a 38MM external wategate....
 

dgoodhue

BuSTeD 4.3
Re: Syclone #560 Rebuild

So the ATR DP and header's will not work with a PTE exhuast housing/ T3 turbo?

The headers will fit, as I beleive they use the same turbo mounting location. I believe that Buick Turbo and 3-4 adapter give slightly higher turbine exhaust outlet so the downpipe is raised to for that.
 

Tony Dipatri

New member
Re: Syclone #560 Rebuild

I would recommend the 60# injectors. Great tunability and readily available.

We stock the injectors, and can help you with tuning as well. You know how to reach us. Glad to hear the truck is coming together so quickly.

Yes, thank you. I had to get this going ASAP for a few reasons. One day when we meet (which I'm sure we will) i'll explain.

Please PM me a quote for a set of 60LB injectors. As far as tuning I will want this done in person. I know the damage that can be caused by bad or faulty parts....my fear is getting it tuned and logging back an forth my bin. Apperently if something is wrong and I don't detect it, I will be damaging the motor in between bin transfers.

Do you think that my truck will be ok with the turbo setup thats is going it it or should I just buy a 20G turbo direct replacement? I am all about different options that making the tuning easier.

Thank you

Tony

This post originally started with Code 59 tuning help.
 
Top