T-Clamps

[TxSy1430]

What size T-clamps hold the hose between the upper ic and the throttle body?

 

[H-TOWN-TYPHOON]

Re: T-Clamps

It's a 4" coupler if I remember correctly.

 

[Sy+Ty]

Re: T-Clamps

It is a 4" coupler. However, I had a hard time finding a T-bolt that wasd just right - 3.75-4.25" (I think) was a tad too small; 4-4.?" was too big & would bottom out before sufficiently tight.

FWIW, NAPA used to stock t-bolts...

Sy+Ty

 

[willyson]

Re: T-Clamps

It is a 4" coupler. However, I had a hard time finding a T-bolt that wasd just right - 3.75-4.25" (I think) was a tad too small; 4-4.?" was too big & would bottom out before sufficiently tight.

FWIW, NAPA used to stock t-bolts...

Sy+Ty

this is correct, went thru the same thing with the too small/big deal, mike lee (RPM) can get them the correct size for the stock ic/tb connector.

 

[ghettosled]

Re: T-Clamps

yeh you need a clamp that fits real snug on the 4" coupler... this will allow it to get real tight without bottoming out. i have a few hundred in stock, along with all standard sizes from 2" - 4.25"

 

[TxSy1430]

Re: T-Clamps

So when I order do I ask for you? Because I will be ordering it next week.

Scott

 

[ghettosled]

Re: T-Clamps

anyone will be able to help. just say you need t bolt clamps for the syty tb connection.

 

[TxSy1430]

Re: T-Clamps

right on...thanks.

Scott