tb size
- Thread starter Raist103
- Start date
Black Knight
I Glow Therefore I am
Re: tb size
Can't you just run a 4" round to 3" round?
Can't you just run a 4" round to 3" round?
Aeroking
e.i.
Re: tb size
http://www.siliconeintakes.com/
where i get all my elbows, vacuum hose, couplers, everything.
http://www.siliconeintakes.com/
where i get all my elbows, vacuum hose, couplers, everything.
Raist103
Engine Killer, iPhone Killer, Lawnmower Killer
Re: tb size
yes you can...but it doesn't seal as good as a true oval would. It puts a lot of stress towards to edges of the oval as it transitions to 3"
yes you can...but it doesn't seal as good as a true oval would. It puts a lot of stress towards to edges of the oval as it transitions to 3"
Black Knight
I Glow Therefore I am
Re: tb size
Hmmm, any ideas where to get 4" oval to 3" round?
I just looked and oval couplers are nonexistent in this size.
Hmmm, any ideas where to get 4" oval to 3" round?
I just looked and oval couplers are nonexistent in this size.
Re: tb size
But there is this for 4" to 4" oval
http://www.sfxperformance.com/parts/SPT9791.htm
That with 3" inlet would be perfect
none that i've ever seen.
But there is this for 4" to 4" oval
http://www.sfxperformance.com/parts/SPT9791.htm
That with 3" inlet would be perfect
Black Knight
I Glow Therefore I am
Re: tb size
I guess I could get that weld a 4" aluminum transition on the end of the tubing.
Not a perfect solution, but it would work.
I guess I could get that weld a 4" aluminum transition on the end of the tubing.
Not a perfect solution, but it would work.
Re: tb size
I couldn't find one either.
No luck finding a oval 4" to 3" after a day of searching. going to have to use 4-3 round
round doesn't seal as well as the oval would and could blow off.
I couldn't find one either.