TCC vibration and elimination through software patch help

B

Blake

Guest
Does anyone have any information on how TCC could be addressed in Promgrammer or hexedit? It appears as though there are 14 fields(grouped together)in Promgrammer.Here's an excerpt from an email I got from Brian concerning a vibration issue with my TC. I tried to write him back but got a quota overload error from his email:

The scenario below is mostly a chip mod correction. There are some minimum parameters that need to be met for LU to happen and with a high performance TC, you can feel the vibe when it slips at minimum throttle 4th gear. What needs to be corrected is the minimum throttle needs to be moved up 5-10 º so you can unlock at minimum throttle cruise instead of have it chatter. I'm working on a nice cut and paste section to integrate into people's chips if they are into making their own chips or include my chip in the package in a 2 or 3 bar option.

I'm not sure to which fields he is referring to. If anyone has experimented with this or know as to which field(s) Brian is referring to, can you please post it here or email me? I really feel it will help the longevity of the torque converter if I can reduce unnessecary strain from vibration during TCC unlock, not to mention the driveability issue.

Thanks for any help anyone can offer. I'd really like to get this taken care of.
George Blake
 

smeagol

Active member
0x00DC F42 (3rd Gear, Upper) Load Limit vs MPH
Load Limit vs MPH
| 20 25 30 35 40 45 50 55 60 65 70 ---------------------------------------------------------------------------
(%)| 0.0 0.3 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.0


0x00E7 F43 (3rd Gear, Lower) Load Limit vs MPH
Load Limit vs MPH
| 20 25 30 35 40 45 50 55 60 65 70 ---------------------------------------------------------------------------
(%)| 0.0 0.2 0.2 0.2 0.2 0.3 0.4 0.5 0.6 0.8 1.0


These are the tables, but Promgrammer doesn't display them like Tunercat does (there is more resolution than just in tenths).

My understanding of these at this point is that in 3rd/4th gear, at those MPH, the TCC will lock/unlock based on these load points. The load (to best of my knowledge) is TPS based. 1.0 = 100%, 0.2 =20%.

So (looking at above tables) you are at 40mph in 3rd gear, if you are less than or equal to 50% TPS, TC will lock, if you are decelerating, going down a hill somehow, and doing 40mph with TPS less than 20%, the TC will unlock (coast freely). Also, if you are at 40mph, with throttle at 60%, the TC will be unlocked. This makes the most sense to me, as you don't want the converter locked up at low MPH/heavy throttle, and you don't want the converter locked up at low speed/very light throttle.

This is my understanding of it. So based on that, and what Brian said, you would need to adjust F43 at the problem MPH, increasing the values at the trouble spots.

I was never 100% clear on these tables, so if anyone has any corrections, please post.
 
B

Blake

Guest
Brian mentioned that Promgrammer wouldn't be totally capable of handling the changes. That makes sense now. I don't have tunercat. I guess I'll have to dig into the hex again and see if I can figure that part out. My vibration is most apparent when going up a hill, light throttle or slightly decreasing throttle(going up a hill coming up on a red light for example), or going down a very slight grade minimum throttle 4th gear I get the vibration. It's not exactly like TCC shudder. I've experienced that before the rebuild, that was more of a "chugging" when doing a WOT downshift. This is more of an annoying vibration(I don't like the idea of what it does to the bushings in the tranny and the rest of the drivetrain). If I just floor it, it hooks right up on the downshift, no vibration.
Issues, issues :D Why can't stuff just plug in and work like they are supposed to on these stupid things? :-?
George
 

BillC

New member
Brian mentioned that Promgrammer wouldn't be totally capable of handling the changes
Umm, actually all he said was that Promgrammer doesn't display the tables with the same resolution as Tunercat. You can still edit the tables just fine.

I'll make the change in the next version of Promgrammer to show hundredths in those tables. Any other changes anyone would like?

I need feedback from users about problems you have had and features/modifications you would like. Don't just complain that Promgrammer doesn't do something you want -- TELL ME ABOUT IT, and I might be able to accomodate you. Promgrammer is designed and written to support the SyTy community -- But if you don't tell me what's going on, I can't support you.
 
B

Blake

Guest
I don't think I was complete enough. Brian HARTMAN said that to me. NOT Brian GREEN. Sorry about that guys. I can see where it would sound inconsistent. I'll just use last names from now on so people don't get miffed :lol: This was the first I had heard of this myself. All Hartman said was that promgrammer wasn't "robust enough" to make the changes. But didn't say why. Then Green explained to me that there was greater resolution possible with tunercat and explained what the resolutions were.

I don't think anyone was putting down Promgrammer. But discussion like this are what bring these issues up and a solution can be derived.
When I was talking about things not working like they are supposed to (plug and play) I was talking about the TC not promgrammer. Relax. Now I'll get a hatemail from Hartman thinking I'm slamming him.
You guys just relaaaaax. :D

Everyone's just so touchy :p

George Blake
(whole name so there's no confusion)
 
B

Blake

Guest
Also wanted to add that I couldn't email Hartman back because his email was giving me quota errors so I brought it here in the event someone else had been through this same deal as well. I had read in the archives of syty.org that there were several others that had run into this issue with the 9/11 and was hoping a software solution, if that truely had been done, could be offered. Maybe even have the exact changes to make with Promgrammer or hexedit or what have you. I was kinda hoping Hartman would chime in and, if there was a simple software fix for the problem, he could get in on the discussion and tell what it was.
This worked out great though because now a have a much better understanding of what those fields mean and not just "cutting and pasting" changes. Thanks again Green for taking time to discuss it a little, and thanks, Bill, for catching the discussion and willing to make the changes.
Thanks,
George Blake
(going back into lurk mode now)
 

smeagol

Active member
No, no problems George. Bill's easy going, so am I (most of the time ;) )

I'm sure that Bill just wants anyone else reading to notify him of any issues in Promgrammer, which is great.

Let me know if these tables help you out at all. I may integrate such changes into the 50# programs, as nearly anyone running those programs will have some sort of higher stall converter, with many being 9-11's.
 

BillC

New member
Sorry, didn't mean to sound touchy. I'm just tired of finding out by accident (or third-hand) about problems with Promgrammer. Really, there shouldn't be anything do-able with Tunercat than you couldn't do just as well, or better, with Promgrammer. My goal is to have Promgrammer become the best prom-editing tool available anywhere for SyTys. All that's required from you guys is feedback and input.
 

Brian Hartman

New member
Sorry, I haven't been on the board for about a month. Blake was asking some stuff on the TCC and he was informing me on what he found out. I knew Promgrammer didn't have the parameters to do what needed to be done and I under estimated Bill's dedication in making Promgrammer everything ANY of us needs. That's really cool Bill, Thanx. Blake asked for my patch and I guess I wasn't clear about why I didn't have it yet. I haven't had time to mess around with it at all. I haven't even had time to build a transmission for myself for any of my trucks so I could have the patch to give. I can't even estimate when I'll ever have a chance to build a tranny for me. They orders come in faster than I can build them and have to constantly turn people away unfortunatly. So I'm not holding onto a golden patch that will cure world hunger to sell for my benefit. I have no intension on ever competing with BG's chips. He did the work and should get most all of the credit along with Todd and should get all the praise, and the ridicule :) Just kidding though unfortunatly it happens. Killer chips and about as good as it gets for a one chip to fit 90% of the applications out there. So understand it isn't 100% correct for anyone but you can build you truck to be correct for it and if it isn't then you have to try the best you can to optimize your setup and not blame him for any short comings. ...So back to the problem with the TC vib.

The 9/11 is a high performance TC that has a large surface area for the TCC and the dampening spring has been removed to make the apply more positive but there are some side effects a small percentage of the people experience. At very light throttle the tranny's pressure may become low enough to allow the TCC to chatter. Normally there isn't very much contact surface on the applied clutch but when you have that same pressure applied to a clutch that has a substancially larger amout of apply surface, the pressure per square inch ratio get low on the big clutch and a vibration is then felt. You can fix this by preventing the TCC from applying under light throttle by making the minimum throttle TCC lock up requirement a bit higher so you will have to have your foot in it a little more and therefore signaling the tranny via TV cable to apply more pressure to the tranny and TC. You can also mess with the minimum MPH for lock up which will only help 3rd gear since 4th gear will already have the minimum MPH criteria met if 3rd in fact already met it. So the speed can hone in 3rd while the minimum TPS will affect both. I'll be working on other parameters to help overall performance during all types of driving conditions and will have the patch or instruction up on my website when I have it available. I will need to test it, of course, so I don't get crucified if there are problems. I'll try to help all I can in the meantime but my time is so erratic I can't promise anything immediate. I've already made a lot of commitments on timely things and they are hard enough to meet, though strangely easy not to meet. :) So hopefully that clears up any misunderstanding on what is going on that envolves me in this.
 
Top