Thoughts on this damper

[TYTILIDIE]

My damper appears to be coming apart and this is my third one. I have always wnated a fluid damper and while i know htey are the only way to go Im just never in a position to spend the bucks on it. Ive been looking at Jegs and Summit and came across this onehttp://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_608763_-1 Does anyone have any thoughts about this piece?

Also looked at this one
http://www.jegs.com/webapp/wcs/stores/servlet/product_10001_10002_93062_-1

 

[TYTILIDIE]

Re: Thoughts on this damper

How important is the diamter? If I use a 6" or 6.5" is that going to kill me?

 

[ViciousV6]

Re: Thoughts on this damper

this unit will fit but you have to Cut the stock timing mark off and fit on a Aftermarket one, since stock size is 6 3/8 in size.

I just installed one but the stock mark is off and had to cut mine off and install new ATI Marker.

Ralph

I just redid my motor because you really should blance the motor with the parts you are going to run incase something is bit off will make failure come sooner.

Ralph

 

[jjorgensen52]

Re: Thoughts on this damper

I agree, I run a fluidampr with an ATI indicator on it

 

[critical]

Re: Thoughts on this damper

Smaller diameter balancers are easier to turn. less rotating mass.
A bigger balancer will put extra strain on the crank, causing it to twist.