Time for a muffler
- Thread starter ircwet
- Start date
Richard Le
New member
Re: Time for a muffler
MagnaFlow stainless steel round mufflers sound really nice and not loud: http://www.summitracing.com/parts/MPE-10416/
MagnaFlow stainless steel round mufflers sound really nice and not loud: http://www.summitracing.com/parts/MPE-10416/
Richard Le
New member
Re: Time for a muffler
Any good muffler shop will be able to custom mandrel bend you a tailpipe.
Any good muffler shop will be able to custom mandrel bend you a tailpipe.
Richard Le
New member
s10blaza
BOOSTED
Re: Time for a muffler
I have the oval MagnaFlow on mine, sounds great, louder than stock but not loud enough to drown out the turbo and no drone at all at highway speeds
I have the oval MagnaFlow on mine, sounds great, louder than stock but not loud enough to drown out the turbo and no drone at all at highway speeds
4C FED
Absolutum Dominium
Re: Time for a muffler
IMO it does not drone. It is no louder than the previous muffler which was some chambered Super Turbo muffler.
NecroWolf
lost marbles member
Re: Time for a muffler
order mandrel bends from summit racing and some clamps and build it yourself.
order mandrel bends from summit racing and some clamps and build it yourself.
vinnieTy
TY # 1889
Re: Time for a muffler
That was the issue i had unless i went about an hour away to a speed shop and leave my truck there for a few days they told me they could make something up for about 4-5 hundred dollars. I first laughed thanked him and hung up. I ended up going with RPM 3inch magnaflow cat back. I finished install last night. Big pain in the a$$. Two bolts on cat broke had to redrill and install two new bolts and nuts. Didnt have time to test drive it yet but did start it and sounded nice and quiet.
On another note i do have a ATR muffler that is going up for sale. Has no more then 20k miles if that. Looks clean, bought it off a memeber here about 2 years ago. I just decided to go all new instead of mismatch. Let me know if interested. :tup:
That was the issue i had unless i went about an hour away to a speed shop and leave my truck there for a few days they told me they could make something up for about 4-5 hundred dollars. I first laughed thanked him and hung up. I ended up going with RPM 3inch magnaflow cat back. I finished install last night. Big pain in the a$$. Two bolts on cat broke had to redrill and install two new bolts and nuts. Didnt have time to test drive it yet but did start it and sounded nice and quiet.
On another note i do have a ATR muffler that is going up for sale. Has no more then 20k miles if that. Looks clean, bought it off a memeber here about 2 years ago. I just decided to go all new instead of mismatch. Let me know if interested. :tup:
SY2455
70's Veteran
Re: Time for a muffler
Dave, I don't remember the name. But there is a shop about 2 miles from RPM that has a 3" mandrel bender. Should be easy to find.
Dave this may be the shop. You can give them a call.
ROYAL MUFFLERS
818-993-9004
21300 Devonshire St #15
Chatsworth CA 91311
Dave, I don't remember the name. But there is a shop about 2 miles from RPM that has a 3" mandrel bender. Should be easy to find.
Dave this may be the shop. You can give them a call.
ROYAL MUFFLERS
818-993-9004
21300 Devonshire St #15
Chatsworth CA 91311
Last edited:
ghettosled
SYTY SUPERSTORE
Re: Time for a muffler
Royal Muffler does not have a mandrel bender. We provided them with the sample mandrel bends for the initial cat back exhaust mockup and had them tweak it for the best fit. You can try Fast Intensions in Reseda. They have a mandrel bender that will do 3". All the guys we use will only do production bending, not one offs..
Royal Muffler does not have a mandrel bender. We provided them with the sample mandrel bends for the initial cat back exhaust mockup and had them tweak it for the best fit. You can try Fast Intensions in Reseda. They have a mandrel bender that will do 3". All the guys we use will only do production bending, not one offs..