Tune up a sy engine

Sy_DK

New member
Hi all

I live in in Denmark where the numbers of SyTy are under 20 pcs. Therefore the help and knowledge are very limited in my country. The only place I can ask is here, so I hope some of you can help me. ;)

My car is a Syclone 1991 with 27k miles on it and bone stock. I want to fix it up (make the engine look better with new hoses etc...) and if possible get some more power out of it.
Is there a "bulletproof" way to get some more power without risking to damage the engine? And where do you prefer to buy the parts?

Best regards
Kim
Denmark :tup:
 

Andreas

New member
Re: Tune up a sy engine

Hi there neighbour :)

No such thing as bulletproof what so ever with these trucks....althougt the JS 80 tranny looks to be a candidate :)
Even built motors break.
I guess you are thinking of get more power with a new chip and don't rebuild your motor with the standrad racebuilt with Eagle, JE, 4bolt etc.

How much more power are we talking about?

Walbro fuelpump, AFPR and mod IC/new IC gives you "safer" and better running truck.

www.detroitturbo.com
www.raceprovenmotors.com
www.JSmanufacturing.com
 

Sy_DK

New member
Re: Tune up a sy engine

Hehe yes I know that a bulletproof thing doesn't exist, but what I meant was a "light" tuning that maybe could give me a better running car, and maybe 50-100 more HP. Is that possible or am I way off?

The walbro fuelpump and new IC sounds like a great idea, what IC can you recommend?
I'm sorry but I don't understand what "AFPR" are? Is it some kind of fuel pump or regulator?
Which chip can you recommend and is it a good idea with a K&N filter too?

Yes I know I have a lot of questions :oops:

Best regards
Kim, Denmark
:tup:
 

Andreas

New member
Re: Tune up a sy engine

Basic tune up is plugs NGK UR5, New Cables , Cap and Rotor, 160 thermostat and set Timing to 0deg.

More hp=more boost=chip+3bar map sensor
If you put a chip in put in Walbro pump, AFPR and get scanning tool like Datamaster.

About the stock IC is the first thing to do is make sure that the pump works. Then "hot-wire" the pump. Either have it run all the time or put a switch to it so you can turn it on manually.
There's "How-to's" on http://www.sytyarchives.com/

Bigger IC projects by changing from Water/Air to Air/Air is a good winterproject.
Theres alot of nice A2A projects under the forum "members project"


You are absolutly right AFPR=AdjustebleFuelPreassuereRegulator

Open filter requires coldair intake of some sort, if not it just sucks in warm air from the engine bay.
Its good thing to get rid of the plastic thingy in the stock setup that goes over the radiator.

Chip http://www.sytychips.com
 

blk00z28

Forced to by choice
Re: Tune up a sy engine

I'd look at, ontop of some of what Andreas has said;

Cap, rotor, plugs, wires, maybe even a better coil. A chip, maybe upgrade to a bigger turbo, get a stall, full exhaust, some good tranny mods. A tranny cooler, and upgrade or replace the lower IC with a better one. That should give you some good performance. And if your good and pick and choose here and there, you could probably spend around $1500 doing all of that. :dunno: ;)
 

sy538

New member
Re: Tune up a sy engine

Yeah hotwiring the IC pump is one first things you should do, and to get alittle more from the stock IC you can get a Johnson pump from APE and run 3/4” heater hose instead of the stock metal lines.
You will need a fuel pump and a chip to run much faster then stock as the fuel system is pretty much maxed out in the stock set up. You can either get a chip made for bigger injectors, or higher base fuel pressure (so you can get more out of the stock injectors). The Ultimate chips work very well and are popular. Recently Dig and Detroit Turbo started selling chips, I haven’t heard anything about their chips, but I know that Dig and Scott know what they are doing.

Do you have a scantool?

http://www.sportmachines.com/maintenance_tips.php
http://www.turbotime.us/html/store/products_syty.htm
http://www.autoperformanceengineering.com/
 

nightdiver

Active member
Re: Tune up a sy engine

You got to decide at which power level you want it to stay.
If you want bulletproof engine do the V8 400+ and youre done
If you stay V6 you will visit this forum every day :)
The stock combo is maxed out so you will need a lot of new parts. Search........
 

Sy_DK

New member
Re: Tune up a sy engine

I don't have any scantool I'm kind of newbie on these car, but what do I need?

I think the first thing to do is to get an new IC and fuelpump and after that maybe a chip. What IC can you recommend and maybe a link where to buy it :)

I'm just curious so what is the V8 400+ trick?
 

nightdiver

Active member
Re: Tune up a sy engine

www.raceprovenmotors.com
for high flow air 2 air.

with a 420 cui V8 you can pump out 500+hp without a turbo. Add a couple of turbos and you easily are going to get 1000-1200 hp. You got to know a lot about turbo tech though.
There is nothing "bolt on " here
As i said before , how much Hp do you want ?
 

Sy_DK

New member
Re: Tune up a sy engine

Ok sounds like fun with an V8 but as you say, it is not for beginners ;)

What I'm looking for is a nice looking engine and as stabile as possible with about 400 HP. But if it means that I will destroy the truck I'll rather have less HP. The truck is very expensive in Denmark and therefore I'm not looking for a "high risk" tuning.

I only use the truck in the summertime and I'm very aware of running the engine properly before I give full throttle. I'll hope this give you a picture of what I want. :tup:
 

Andreas

New member
Re: Tune up a sy engine

You be very positive surprised if you tune your truck so everything runs 100%, that feeling would probably last the whole short summer :) I have just mine run better not 100%

If you go with a chip, which I think is just what youre looking for, and raise the boost I personally go for a Alky kit (www.detroitturbo.com) to prevent knock due to the limited stock IC. More boost=more heat

Got one Johnson pump on the shelf if you want to buy.Got heat isolated hoses too.
I even got a extra heatexchanger.
 

Will_in_China

Truckless Wonder
Re: Tune up a sy engine

I agree with Andreas and would recommend you do what we call a "Spring Cleaning" to your Sy:
Which would include:
Spark Plugs
Spark Plug Wires
Cap and Rotor
Replacement Vacuum Lines

Also:
New IC Pump hotwired to run all the time
New Fuel Pump
Adjustable Fuel Pressure Regulator

So far these items make your truck "Not Suck" and give you the basics to tune from.

From there I would consider an alcohol injection kit and chip.
Some people like the Razor or the SMC or the Aquamist. I like the Razor from what I have seen.
The alcohol injection kit, which can run on windshield wiper fluid, prevents detonation which is REAL bad for our motors and lets you run more boost for more power inexpensively.

You will need a scantool to see what your truck is doing, like Datamaster or TurboLink but some get by with 'handheld' units like they sell in parts stores. You would need an 'OBD 1' or GMECM compatible one.

There are several chip options, and with an alky kit you would be safe with most "street" chips or could have one of the good chip guys on here make you a 'custom' one for your truck that would take advantage of the alcohol injection.

In summary, based on what you are looking for it's like this:
1. Clean up your electrical and vacuum system.
2. Add some tuning control for your fuel.
3. Add Alky injection for safety.
4. Get a good Chip.

You might also want to do a catalytic converter delete or race cat and possibly exhaust, if you have money left over.

Most of these parts are available at the retailers that were listed above.
Don't hesitate to post as many questions as necessary for you to get your truck running right.

There are alot of folks passionate about these trucks willing to help get yours running right.

-Will
 
Top