turbo gaskets?

tbauer03

TRBOBOX
I need to swap my turbo, Is there any exhaust gaskets or coolant gaskets / O-rings? I went to the local gm dealership and the diagram he pulled up did not show any exhaust gaskets, it did show a gasket on the oil return line but it didn't show any part numbers or anything that he could use to order one. So is there anything I will need and where can I get. Or what are the part numbers so i can tell the GM guy and then he can order the parts.
Thanks
 

BoostedSUV

Active member
Re: turbo gaskets?

The only gasket on the turbo is on oil return line. Otherwise like Erik said, there aren't any gaskets between the exhaust manifold and turbo, or in between the turbo housing and the downpipe. Just use high-temp RTV silicone. :tup:
 

Foot Performance

Donating Member
Re: turbo gaskets?

I put all RPM coolant lines on so they were AN fittings I did use a gasket for the oil return and I also used a gasket for the turbo to manifold If you want one use a 2005 dodge(there are probably more years that will work) with a cummins they use a gasket there and it fits like a glove. But I think most everyone uses no gaskets

I also had gaskets made for the JSM down pipe I am currently using.
 

RampantWolf

Classic Car Dealer
Re: turbo gaskets?

The only gasket on the turbo is on oil return line. Otherwise like Erik said, there aren't any gaskets between the exhaust manifold and turbo, or in between the turbo housing and the downpipe. Just use high-temp RTV silicone. :tup:

I have a leak at the Oil Return Gasket and need to replace it. Do you know the thickness of this gasket or where I can find it?

Best regards,

Markus
 
Top