ultimate hp/speed gain

chadjett

New member
on a stock sy just switching to ultimate chip what's the possibility???
for each setting??
i just want a sraight answer!!!
i kow the more mods the better but i don't want to know that i just want to know if you switch chips could you run low/high 11,12,13's if engine doesn't blow or any thing
 

chadjett

New member
thanks but that's wat i meant by straight answer.
i know there is certain things you should do first etc,etc, i just wanted to know if you took a stock sy and switch to an ultimate what itwould do on each setting.
i know every truck is different i just mean in general
thanks dave it helped some
 

Daron

Active member
In my experience the chip was a considerable difference than stock, but the real gains were noted when intake, exhaust, fuel and timing were optimized after installing the Ultimate.

<font size=-1>[ This Message was edited by: Daron on 2002-02-17 11:41 ]</font>
 

Tooky

Serious about performance
Hey Chad I really wish I could answer this and I hope someone else does cause I think it's a great question but in the meanwhile I am going to bite the bullet and say a number to get things started: 12.8! I think that's in the ballpark. I will also say this, you will not get in the 11s with a stock truck just by putting the ultimate chip.
 

Pittman

New member
I bet the 12.8 is pretty close, maybe a little quicker or slower but not much. My sy is stock except for a new art car converter (2800 stall) I run mid 12's with the converter and ultimate, +100 octane, 160 thermostat. 30k miles
 
Top