Ultimate settings vs octane..

myclone

Donating Member
Hadda make this quick so I didnt do a search on the subject..

Here goes.. I have ran the best of 8.00 in the 1/8th mi with ~100 octane (3:1 mix of xylene and 93) and 22 psi/T1. Got a max of ~4 deg KR till I bumped the FP up to 56psi. That dropped the KR to ~1.7 max.

Does T2 have even more aggressive timing? Ive never messed with anything other than T1. Just not enough track time. Im taking "baby steps" here. Can I go to T2 ~20psi with the xylene/93 mix in someones opinion. Don wanna scatter it blindly beating on the truck before talking to you ppl....



I NEED to do a ~7.70 in the 1/8th..

Got a GN/TR bud that gives me greif all the time about my "slow" truck. We're just messin with each other in good fun so its no big deal but it WOULD be nice to stay right with them at Mooresville next weekend.. :grin:

Oh, one more thing... Is a 1.68 60ft good on stock 245 stones?? I heard it was from jwalleyworld.. Ive only done it once as I usally hang right at mid/high 1.7s 60 fts..

TIA

<font size=-1>[ This Message was edited by: myclone on 2001-11-29 12:30 ]</font>
 

JoeLutz

New member
The T2 does have more aggressive timing, but my Ty seems to run more smoothly on this setting. Mabey you should try less boost and the T2 to see how it runs and what your KR is. I have been told the stock compressor is way out of the efficiency range at over 20 psi and could be contributing to the knock and not really giving you much power increase.
 

BigAl...

Member
I am running an SMC alky injection system and I run the T2-17 setting all of the time with 4degs max KR on 93 octane. T2 seems peppier and nicer to drive.

BigAl...
 

myclone

Donating Member
More info..

Turbo is not stock... Garrett hybrid: T3 turbine housing(I know its small...), 60 comp side. Higher the boost the better the it runs. My limit is KR.

Eng is stock from TB to oil pan. ALL the mods in the links/FAQ plus some minor port/polish work on the comp and upper IC. 9/11 TC, homemade cold air kit thingy, etc..

Got a alchy kit in the works but just aint gonna happen right now.

As for the 7.70= 11.xx... I dunno.. Thats what the conversion math says but I gotta feeling that aerodynamics starts chipping away at that number for us. Thats just my gut feeling. I may be wrong (happens)

If so, the 8.00 = 12.66 in the quarter. I don think Im that quick(yet). Feel free to dissagree with that as I would HOPE myclone would get its slow butt in the mid twelves.. Someday maybe :roll:

Oh yeah, I have yet to lock the TC on a pass.. Gonna try that too.. Might knock a tenth or so off. Might load the motor down and increase KR, I dunno. Gonna try it and see..



<font size=-1>[ This Message was edited by: myclone on 2001-11-29 15:06 ]</font>
 

Buster

New member
On 2001-11-29 13:12, SPEEDFREAK wrote:
Myclone just think you get that 7.70 next week that = 11's in the 1/4!!!!!!!!!!!!!

I've ran 7.7's but that doesn't mean I have an 11 second truck, in fact I've ran faster than 7.7's in the 1/8, but I've never turned even a 11.99 in the 1/4. A 7.70 can turn anything from a 12.40 to an 11.80 from what I've seen.
 

hamrhead

Donating Member
1/8 mile 7.655
1/4 mile in the sig

At least this is how it worked for my 'stock engine w/ lotsa bolt-ons' Sy.
 

SPEEDFREAK

New member
I was just going by one of my old time slips. I know it differs. I was just trying to pump Myclone up for next week.
 

myclone

Donating Member
On 2001-11-29 23:26, SPEEDFREAK wrote:
I was just going by one of my old time slips. I know it differs. I was just trying to pump Myclone up for next week.

You goin to Mooresville too??? If so, cool.. Dunno if you noticed the questions I been postin but I got a LOT of things I wanna try while Im there.. Got a GN bud I wanna pick on too.. All in fun but I wanna be able to ask em why a "slow truck" kept up with em.. :grin:
 

SPEEDFREAK

New member
Hell yes I'm going. That track is only about 45min from my house. There is supposed to be a good showing. I hope the weather gets a little cooler before then. I'll be in the all white Ty with the 4 inch hood and slicks.

_________________
Brandon
93 Typhoon #804 White/White-----00 SS Camaro
91 Z28------90 Bandit 2 TA 30k miles
96 Vortech SC Cobra (for sale)
94 Mustang GT--------93 Paxton SC LX 5.0

catsNeon.jpg


<font size=-1>[ This Message was edited by: SPEEDFREAK on 2001-11-30 17:37 ]</font>
 

myclone

Donating Member
On 2001-11-30 17:35, SPEEDFREAK wrote:
Hell yes I'm going. I'll be in the all white Ty with the 4 inch hood and slicks.

_________________
Brandon
93 Typhoon #804 White/White-----00 SS Camaro
91 Z28------90 Bandit 2 TA 30k miles
96 Vortech SC Cobra (for sale)
94 Mustang GT--------93 Paxton SC LX 5.0

:cool:
 
Top