Why open loop chips?

Hu Ryde

Donating Member
What are the advantages of it? I know that it doesnt look for the o2 but why would you want that? If it doesnt look for an o2 then it wouldn't be able to correct any fueling issues right?
 

JSM

Active member
the stock o2 is OK at best.

and with ECM, trying to make corrections, you can get an oscillation effect.

if chip is tuned right , you don't need closed loop anyways. Plus why would you want an OK at best o2 sensor telling computer how to act...

O yea, stock ECM has less memory in it, than a 99cent calculator. So it isn't learning much anyways.
 

Buster

New member
Plus you might not wanta run 14.7 all the time. My truck idles great a 13.7, and gets great milage at 15.7. I'm pretty sure this is why Brian went open loop, mainly for idle issues.
 

smeagol

Active member
Yup like those guys said.

Richer idle helps - check the post in the lounge with a screenshot of my idle. You'd swear I put some sort of filter on the tach gauge feed, it is ROCK solid.

You can go leaner than 14.7 at cruise for better mileage.

Our ECM has 2 BLM cells - one for idle (ok idea) and another for open throttle - so one cell is supposed to account for ALL of your long term open throttle adjustments?

I've seen the short term fueling adjustment cause problems too - surging and such, if it's just a bit lean...
 
Top