Wideband for FAST system

Try Me

New member
Hi All.
recently my o2 sensor stopped reading anything in the dashboard on the laptop. it constantly stays around 14.0 actual air fuel. I called and spoke to Joe, i think it was Joe anyway, at Presicion Turbo and after some troubleshooting it looked as though the o2 had finally just gave up. He quoted me an amazing price of only $385 for another one :eek: . I also called a tech at FAST and he told me the same thing.

On to my question...
The o2 sensor has "japan" and some numbers that i was going to try and cross over, but i figured id ask here to see if anyone knows. Is there an o2 sensor that can be installed in place of this one that will work with the FAST system? Any info would be great, since im not to excited about spending $400 on a new sensor, but want to get it straight so i can get this thing tuned up for the summer.

Thanks!
 

Try Me

New member
http://www.techedge.com.au/vehicle/wbo2/wbntk.htm

Well i think ive answered my own question :p . I wasnt too suprised when i followed this link and saw my o2 from my truck in a package with a honda part number! This little guy is still expensive though. I just ordered one from the honda dealer through my Dads shop and it ran me just under $300. still about $100 less than through the FAST people. Gotta pay to play :cry: . Oh well, hopefully that will get me ready to go to the dyno and see what this thing can do :D
 

smeagol

Active member
Pretty sure that won't work with the FAST setup and you'll have to go through them.

Buy a sensor from them, and they give you a calibration disk, that also matches the serial of the 02 to the ECM.

I know guys were looking into a way around this, but last I heard they didn't find an easy way out.
 

Try Me

New member
Yup. I just attempted to run the honda part that came in today. No go. The dashboard actually reads 0.00 actual a/f. Oh well, luckily i didnt get the o2 dirty or throw away the package :) so i can just take it right back. It was worth a try though :cry:
 

leroy

Donating Member
It may be worthwhile to "torch" the old sensor to rejuvenate it. Use a torch to burn residue from the old sensor.

Good luck.

Jim
 
Top