Search results

Re: New 5.7 Eagle Rods Pm sent

Re: everything for sale (2 trucks and all my inventory) Whoever gets the whole package deal if you are wanting to sell some parts like main caps, pistons, wide band, etc.... Depending on what piston size I will be interested in purchasing some items. Thanks

Re: 10 sec part out Are you interested in selling just the tial bov? Pm me a price if your interested. Thanks

Re: Profec B II for sale - used Interested pending pics. Pm sent

Re: RPM engine vs Rebuilt engine Thanks for all the replies, I am going to start the tear down in a couple weeks and see what I find. I still think I might have a bad exhaust valve due to the popping sound through the exhaust cross pipe on light throttle only.

Re: RPM engine vs Rebuilt engine PM sent

Re: RPM engine vs Rebuilt engine I'm sure this has been asked before but can i just get a l35 block and use a sy/ty crank and cam? And should a high volume oil pump be used?

Would it be cheaper to purchase a rpm short block or rebuild a stock block? For the stock block thinking about doing stock crank, rods, pistons (maybe cryo treated) with 4 bolt main. Would a stock oil pump be good our the high volume pump be better? Double roller chain necessary? Also maybe l35...

Re: Vacuum Leaks Ok finally got a couple minutes today to take a look at the truck. I did locate a leak between the throttle body and upper ic. Tried to tighten down the clamps more and 1 clamp broke. So I am going to order a new silicone coupler and t-bolt clamps and recheck. Does anyone know...

Re: Vacuum Leaks Ok took the egr valve off and put my block off plate on and went and added air again. The egr valve was still ballooning, so i pinched the vacuum line off and obviously it stopped ballooning. The air does bleed down fast and sounds from intake area. Could that just be a intake...

Re: Vacuum Leaks I am trying to locate a popping/knocking noise when you blip the throttle. It almost sound like the noise is echoing through the exhaust cross pipe. Or other idea its bad exhaust valve hanging up or mistaking all this for a lower end noise.

I have a bike tube on the upper cooler checking for any possible vacuum leaks, while adding shop air into system I see the egr diaphragm ballooning and than it leaks down. My question is this normal?

Re: Autometer Boost gauge I have the phantom 2 oil psi and boost gauge, let me know if your interested I can send you pics if you like. Thanks

Does anyone have pix handy of the front and backside of a stock turbo? Thanks

Re: Help w/ noise Can photobucket host videos? If not what is a good video host? I have some video of the noise I have.

Re: Help w/ noise Where are the common areas for the manifolds or cross pipe to crack? Thanks

Re: Useless Typhoon Features..... Is that for a garage door remote

Re: Help w/ noise Looked all over with a mirror and no soot seen. The truck is hardly driven and low mileage

Re: Help w/ noise Have not had time to look at the truck but today I ran it for a little bit and the noise almost sounds like it's coming from the exhaust cross pipe. Any ideas anyone?

Re: Help w/ noise I would think if the turbo was bad it wouldn't build full boost but it does. Unless the bearing inside the turbo is bad but i would think it would make the nose all the time. The noise also sounds like a broken rocker but i had the covers off and they all looked good.