WyoSyclone
Active member
In Production!
OK Guys, quite a few have PM'd me regarding the braided stainless ABS delete kit I had made for my Sy.... here's the link - http://www.syty.net/forums/showthread.php?t=59904
I contacted Michael Hood cuz he said he may be offering a similar kit. He said time won't allow him to go forward with his and he gave me his blessings for going ahead with this GP.
So, here's how this one is going to work..
1) This GP will close on July 31st (I may extend it if there is interest) UPDATE (7/2/08) - having to cut this off at 20 kits... I will be gone most of July.2) I will be out of town from July 3rd to July 9th so will not be communicating with, or shipping to anyone during that time.
3) I will ship everything via USPS - see here to quote to your shipping area.....
http://www.usps.com/tools/calculatepostage/welcome.htm?from=home&page=0061calculatepostage
4) Everything will ship "Priority Mail Flat Rate Box" from my area code 74074
5) I will ship once per week (I will ship Internationally).
6) I'm going to invest some money and have NAPA make a few of these so they are ready to go.... they will have to order fittings, and it can take up to 3 days for them to receive them.
7) I would like to do "Paypal only" on this just because it is easier.... Once you have ordered I will need payment and will provide total cost.... I will be adding 3% to the total cost (including shipping) to cover the Paypal fees. I'm not marking these up, at all, so you will be paying exactly what I pay for them (my original kit was less because they messed up and left a few fittings off of my invoice).
8) Before I ship to anyone I would like two people to purchase one of each kit. I would like for these people to be able to install the kits right away, provide feedback on this thread regarding any mods that may be needed.
9) After these two people confirm that everything is a go, I will begin shipping to all GP participants.
10) Please post your order preference on the thread, then PM me your order preference and shipping info. I will give you my paypal addy in my response to your PM.
IMPORTANT! - These kits are made to connect to the 'Combination Valve' - they are not designed to connect to the master cylinder!
A Little Bit about the Kits....
Option "A"
This kit includes front and rear ABS-delete lines. This kit lays the front lines against the inner fenderwell. I DO NOT recommend this kit if you are running without inner fenders, as something could be picked up by the tire and rip your brake lines apart (could happen anyway, but I feel the need to post this warning).
Option "B"
This kit includes front and rear ABS delete lines. This kit takes the front lines and runs them THROUGH the driver's side fender (if I was going to do mine again this is probably what I would do because it is a little cleaner looking).
Notes:
All lines are custom made, and each line is stamped with a code that traces it back to the shop that made it (these are DOT-approved lines, and that is a requirement of DOT certification). Each line is tested to 3,000psi! :crazyeye:
UPDATED PRICING - 6/18/08
New Price
Option "A"$106, includes tax and paypal fee, shipping extra
Option "B" $120, includes tax and paypal fee, shipping extra
OLD PRICE.......
So, total damage for them is:
Option "A" is $146.33, not including shipping or paypal 3%.
Option "B" is $164.62, not including shipping or paypal 3%
Now Available in Red, Green, Blue, or Clear!
PLEASE, PLEASE, PLEASE.... DO NOT USE OPEN-ENDED WRENCHES ON THESE FITTINGS - ONLY USE TUBING WRENCHES!! NOT USING TUBING WRENCHES CAN RUIN THESE FITTINGS, WHICH WILL RUIN THE KIT!!
Thanks guys! Hope you like them
UPDATE
Ordered:_______________Paid Yes/No:__________Option:_______Shipped?
1) Syclone0209____________Yes___________________A_______shipped
2) Foot___________________Yes__________________A_________picked up
3) 43Tftw_________________Yes___________________A_______shipped
4) Bezerk_________________Yes___________________A_______shipped
5) Brassmonkey___________ Yes___________________A_______shipped
6) JHarrison_______________Yes___________________A_______shipped
7) HTown_________________Yes___________________B________shipped
8) SikVSix________________ Yes___________________A_______shipped
9) Carbon Fiber____________Yes____________________A_______shipped
10) SkyTye________________Yes____________________B_______shipped
11) BlkTye_________________Yes___________________A clear___shipped
13) BoostedAT______________Yes___________________A clear___shipped
14) Wayboarder_____________Yes____________________A clear__shipped
15) Hattrik__________________Yes___________________A_______shipped
16) Syclone2234_____________Yes___________________B_______shipped
17) MikeK__________________Yes___________________A________delivered
18) SparkWire_______________Yes___________________B_______shipped
19)KIER24601_______________No___________________B_______shipped
20) JEB91SY________________Yes___________________B______shipped
(edit - NAPA asked me to remove the pics of the invoice)
OK Guys, quite a few have PM'd me regarding the braided stainless ABS delete kit I had made for my Sy.... here's the link - http://www.syty.net/forums/showthread.php?t=59904
I contacted Michael Hood cuz he said he may be offering a similar kit. He said time won't allow him to go forward with his and he gave me his blessings for going ahead with this GP.
So, here's how this one is going to work..
1) This GP will close on July 31st (I may extend it if there is interest) UPDATE (7/2/08) - having to cut this off at 20 kits... I will be gone most of July.2) I will be out of town from July 3rd to July 9th so will not be communicating with, or shipping to anyone during that time.
3) I will ship everything via USPS - see here to quote to your shipping area.....
http://www.usps.com/tools/calculatepostage/welcome.htm?from=home&page=0061calculatepostage
4) Everything will ship "Priority Mail Flat Rate Box" from my area code 74074
5) I will ship once per week (I will ship Internationally).
6) I'm going to invest some money and have NAPA make a few of these so they are ready to go.... they will have to order fittings, and it can take up to 3 days for them to receive them.
7) I would like to do "Paypal only" on this just because it is easier.... Once you have ordered I will need payment and will provide total cost.... I will be adding 3% to the total cost (including shipping) to cover the Paypal fees. I'm not marking these up, at all, so you will be paying exactly what I pay for them (my original kit was less because they messed up and left a few fittings off of my invoice).
8) Before I ship to anyone I would like two people to purchase one of each kit. I would like for these people to be able to install the kits right away, provide feedback on this thread regarding any mods that may be needed.
9) After these two people confirm that everything is a go, I will begin shipping to all GP participants.
10) Please post your order preference on the thread, then PM me your order preference and shipping info. I will give you my paypal addy in my response to your PM.
IMPORTANT! - These kits are made to connect to the 'Combination Valve' - they are not designed to connect to the master cylinder!
A Little Bit about the Kits....
Option "A"
This kit includes front and rear ABS-delete lines. This kit lays the front lines against the inner fenderwell. I DO NOT recommend this kit if you are running without inner fenders, as something could be picked up by the tire and rip your brake lines apart (could happen anyway, but I feel the need to post this warning).
Option "B"
This kit includes front and rear ABS delete lines. This kit takes the front lines and runs them THROUGH the driver's side fender (if I was going to do mine again this is probably what I would do because it is a little cleaner looking).
Notes:
All lines are custom made, and each line is stamped with a code that traces it back to the shop that made it (these are DOT-approved lines, and that is a requirement of DOT certification). Each line is tested to 3,000psi! :crazyeye:
UPDATED PRICING - 6/18/08
New Price
Option "A"$106, includes tax and paypal fee, shipping extra
Option "B" $120, includes tax and paypal fee, shipping extra
OLD PRICE.......
So, total damage for them is:
Option "A" is $146.33, not including shipping or paypal 3%.
Option "B" is $164.62, not including shipping or paypal 3%
Now Available in Red, Green, Blue, or Clear!
PLEASE, PLEASE, PLEASE.... DO NOT USE OPEN-ENDED WRENCHES ON THESE FITTINGS - ONLY USE TUBING WRENCHES!! NOT USING TUBING WRENCHES CAN RUIN THESE FITTINGS, WHICH WILL RUIN THE KIT!!
Thanks guys! Hope you like them
UPDATE
Ordered:_______________Paid Yes/No:__________Option:_______Shipped?
1) Syclone0209____________Yes___________________A_______shipped
2) Foot___________________Yes__________________A_________picked up
3) 43Tftw_________________Yes___________________A_______shipped
4) Bezerk_________________Yes___________________A_______shipped
5) Brassmonkey___________ Yes___________________A_______shipped
6) JHarrison_______________Yes___________________A_______shipped
7) HTown_________________Yes___________________B________shipped
8) SikVSix________________ Yes___________________A_______shipped
9) Carbon Fiber____________Yes____________________A_______shipped
10) SkyTye________________Yes____________________B_______shipped
11) BlkTye_________________Yes___________________A clear___shipped
13) BoostedAT______________Yes___________________A clear___shipped
14) Wayboarder_____________Yes____________________A clear__shipped
15) Hattrik__________________Yes___________________A_______shipped
16) Syclone2234_____________Yes___________________B_______shipped
17) MikeK__________________Yes___________________A________delivered
18) SparkWire_______________Yes___________________B_______shipped
19)KIER24601_______________No___________________B_______shipped
20) JEB91SY________________Yes___________________B______shipped
(edit - NAPA asked me to remove the pics of the invoice)
Last edited:
