Looking for a 10 sec Sy....

threat724

New member
Re: Looking for a 10 sec Sy....

I don't even know if I could get a 10 second Sy for this price but I was trying to spend about $25000....
 

autoaddictions

Active member
Re: Looking for a 10 sec Sy....

I don't even know if I could get a 10 second Sy for this price but I was trying to spend about $25000....

Lol how many 10 sec passes do you want to make. If ts 1 or 2 yes it can be done. If you want it to hold up for more then a few hail mary passes than I'd say no. And since there are only about 4 syclones out there that run in the 10s that should be a testament to just how much money and dedication it takes to pull it off. I know I wouldn't sell my truck for 25k any body else interested.
 

IpHoOnDyou

New member
Re: Looking for a 10 sec Sy....

10 second syclone "ready to go"=35k an up. Buy a clean one an build as you go. More fun an you learn your truck.
 

RealFastV6

@jb_and_his_coffee
Just keep looking. Ryan sold his not too long ago for around there. It was a very well built truck.

I don't think 25k is out of the ballpark.
 

Black Knight

I Glow Therefore I am
Re: Looking for a 10 sec Sy....

Just keep looking. Ryan sold his not too long ago for around there. It was a very well built truck.

I don't think 25k is out of the ballpark.

Ryan's never went 10's though. It had all the parts to do it, but didn't come with a slip to back it. Unless it goes down the track and comes back with a slip, it don't count.
 

RealFastV6

@jb_and_his_coffee
Ryan's never went 10's though. It had all the parts to do it, but didn't come with a slip to back it. Unless it goes down the track and comes back with a slip, it don't count.

First time it was posted it hadn't.

Then he had it tuned and made some 10 second passes. Then he sold it.
 

dgoodhue

BuSTeD 4.3
Re: Looking for a 10 sec Sy....

The price is going to depend on the build. bowtie block engine build and 4L80e are very expensive.

Maxtor truck is a pristine very low mile bowtie Syclone, so I am sure he price reflect that.
 

threat724

New member
Re: Looking for a 10 sec Sy....

I didn't mean to offend anybody.. I'm actually a GN guy who is new to the SYTY world. I always wanted a GN (T-Type),TTA, and a Syclone. I have 2 of the 3. I probably should have did more research on how much a nice Syclone is going for and how hard it is to get it to run into the 10's. Also,I didn't know there were only about 4 Syclones running in the 10's. I wasn't really going to track it. Just wanted a clean truck to drive around and take to cruise nights. And when I'm out cruising and playing around on the e-way with the crew, have a little heat under the hood to show them what the Syclones are all about. It seems $25000 might get a strong mid 11 second runner.
 

Turbotoyz

Member
Re: Looking for a 10 sec Sy....

Ill sell you my 10 second Typhoon. It will run 10s or faster, but only once. You see, dropping one of these bricks out of an airplane should get you the speed, but only once. Ill sell it for 10k though.

Inb4 a real genius figures out the exact velocity reached by one of these turds being dropped out of a plane.
 

cloneman315

Active member
Re: Looking for a 10 sec Sy....

I possibly would consider mine for a little bit more than 25k,and I would consider mine one of the cleaner and simplest builds out there.I have not run the 1/4 in several years since my upgrades but I think she has a mid 10 or so in her now possibly.I will have to look for the slips but I believe it went 10.80 or .90.But she can def cut a 60ft,great for street racing.
 
Last edited:

Black Knight

I Glow Therefore I am
Re: Looking for a 10 sec Sy....

First time it was posted it hadn't.

Then he had it tuned and made some 10 second passes. Then he sold it.

I'm an idiot, I was thinking of Jeremy's for some reason, long day.

Jeremy's had 10 sec parts but no slip.

I didn't mean to offend anybody.. I'm actually a GN guy who is new to the SYTY world. I always wanted a GN (T-Type),TTA, and a Syclone. I have 2 of the 3. I probably should have did more research on how much a nice Syclone is going for and how hard it is to get it to run into the 10's. Also,I didn't know there were only about 4 Syclones running in the 10's. I wasn't really going to track it. Just wanted a clean truck to drive around and take to cruise nights. And when I'm out cruising and playing around on the e-way with the crew, have a little heat under the hood to show them what the Syclones are all about. It seems $25000 might get a strong mid 11 second runner.

You didn't offend anyone, and I think your starting to understand a little better. A mid-low 11 sec SyTy will hand a lot of people their ass on a plate.
 
Re: Looking for a 10 sec Sy....

I possibly would consider mine for a little bit more than 25k,and I would consider mine one of the cleaner and simplest builds out there.I have not run the 1/4 in several years since my upgrades but I think she has a mid 10 or so in her now possibly.I will have to look for the slips but I believe it went 10.80 or .90.But she can def cut a 60ft,great for street racing.

I was thinking of this truck when I first started reading the ad!
 

bezerk

New member
Re: Looking for a 10 sec Sy....

if you are a car guy, and like to work on things, you might be better off building one yourselve. (buy a good sy with busted engine and trans) and work your way up.
that way you learn alot and know u wont get a halve assed truck.

The fun part this way is also you can hawk arounf the for sale section to score some cheap deals on upgrade parts.

i have yet to run a 10's, but i can run 11.2 whole day long with terrible 60Ft. (1.83). and it costed way less than 25K.
 
Top