Mark Williams 32 Spline input shaft group purchase Try # 2

fivetodrive

CRISPY
Due to a lot of PM requests i am looking at doing another round of at least 10 4340 heat treated 4l80e input shafts, these will also work on a 32 spline turbo 400 as well, all work is done in house so no delays for treating after the machining.


There have been questions on what this is for - This input shaft is the critical part on being able to put a 4l80e transmission in the Syclone or Typhoon. A 4l80e is much more capable of handling the torque that our motors make but has a 32 spline output shaft. Many people have converted to the 4l80e and have resplined the output shaft of the transmission to 27 splines. This has proven problematic and many have twisted the re-splined output shaft on the 4l80e transmission.

To resolve this issue this community came up with the idea of making a new 32 spline input shaft for the transfer case that will mate with the standard 32 spline output shaft of the 4l80e. The huge benefit of this 32 spline input shaft is that the transfer case is very easy to work on, compared to a transmission and the input shaft can be replaced without any special tools. There are few threads here with detailed pictures of the disassemble and reassembly.


The price will be $625 dollars per shaft.


The shafts will be made by Mark Williams a world class producer of custom drive line parts and assigned a part # and added to his catalog.

When i ship them all of these will be insured for the replacement cost of one shaft which is nearly $1200.

A deposit of $300 dollars is required. My paypal is aaronptimm@yahoo.com


1.) Djsy934 - Paid in full - Shipped - recieved
2.) Cheatam - Paid in full - Delivered!
3.) Cheatam - Paid in full - Delivered!
4.) Jbird - Paid in full Shipped!
5.) niceguy678us - Paid in full - Shipped!
6. ) 68steiny - Paid in full - Shipped!
7.) Turbo joe - Paid in full - Shipped!
8.) JJustice - Paid in full - Shipped!
9.) tx1 - Paid in full- Shipped!
10.) tunerpike - Paid in full- Shipped!
11.) Dr gixxer - Paid in full- Shipped!
12.) MIXEDBREED - Paid in full- Shipped!


Next Round!
1.) Captain Morgan (deposit received)
2.) Captain Morgan (deposit received)
3.) Fivetodrive - (Deposit Received :) )
4.) BlaneSVT - (Deposit Received)
5.) Henry 283 (deposit received)
6.) Henry 283 (deposit received)
7.) car46999 (deposit received)
8.) SyTyJedi
9.) JamieL deposit received
10) Sy487 (deposit received)



IMAG0280_zpsd3816fa9.jpg
 
Last edited:

DanenGraham

Big in the rear
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I picked up one a while back, so count me out. But thanks!
 

tx1

New member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I still want one, so count me in.
 

GT42RSY

Large Turbo
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I want one. Or should I say need one.
 

gt67sy

Member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I'm giving up on my thoughts that a 4l60e will survive my build. Im down for one
 

fivetodrive

CRISPY
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

That is getting us closer. If we are half way I could make another push for the next 5!
 

GT42RSY

Large Turbo
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

Nobody else needs one right now?
 

fivetodrive

CRISPY
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I bet we could get more interest at tax refund time...
 

68steiny

Member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I'm interested and confused...can someone tell me what else I need to do the conversion if I go this route? Do I need the stout adapter and a 32 spline output shaft for the trans in addition to this part?

Also, I realize this is the strong route but the weaker 4l80e route is the rpm adapter and 27 spline output shaft and no transfer case parts...correct?
 

RealFastV6

@jb_and_his_coffee
4x4 4L80Es will come with a 32 spline output shaft already.

The RPM adapter and Stouts adapter are interchangeable for practical purposes, whether you go the 27 or 32 route. You still need one or the other.

Yes the 32 spline TC input shaft route is stronger than the 27 spline route. Search back there's some broken 27s.

Other parts needed are a trans crossmember, computer to run the trans, shorter driveshaft, longer propshaft, tight linkage parts, transfer case brace extension or modify yours, dipstick, and probably something else I'm forgetting.
 

68steiny

Member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

Cool...I just bot a 80e tubular x member from the v8 dude and I'm picking up a 4x4 trans next week. So I can get the stout or rpm and be good with this shaft...ok!

You can add me to the list!
 

MIXEDBREED

New member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

Put me down for one. Just let me know when the group purchase is on and what paypal to send to.
 

MIXEDBREED

New member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

4x4 4L80Es will come with a 32 spline output shaft already.

The RPM adapter and Stouts adapter are interchangeable for practical purposes, whether you go the 27 or 32 route. You still need one or the other.

Yes the 32 spline TC input shaft route is stronger than the 27 spline route. Search back there's some broken 27s.

Other parts needed are a trans crossmember, computer to run the trans, shorter driveshaft, longer propshaft, tight linkage parts, transfer case brace extension or modify yours, dipstick, and probably something else I'm forgetting.

I wont be needing a computer, th400 with a trans break for me lol. We run mostly 1/8 around here and dont street drive the truck that much anyways.

Has anyone tried using the bravade ds, they are shorter and have the bigger yoke also. I have one lying around so when I do my swap i will see if it works or not on my syclone. I already have the bravade tc in my truck.
 

fivetodrive

CRISPY
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

Dang we are getting close! I will see what we can do in January! Would love to get this off the ground!
 

turbojoe

Member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

add my name to the list, will send deposit later tonight.
 

GT42RSY

Large Turbo
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

Awesome! That should be 8,only a couple more to go.
 

cheatham2492

New member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

Aron,
I need one for my tcase is this still going? Or should I call mark Williams ..??
Thanks holms.
Cheatie
 

Dr.Gixxer

Donating Member
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

I might be in for one of these again. Need to see what taxes will do for me before I can commit again.
 

fivetodrive

CRISPY
Re: Mark Williams 32 Spline input shaft group purchase Try # 2

It looks real close. I will contact mark Williams and get the ball rolling. I will also re contact everyone that seems to be in. And start taking deposits!
 
Top