fivetodrive
CRISPY
NEW IN BOX Never used! $500 or best offer shipped !!!
Alkycontrol Methanol Injection kit for the 1991 Syclone, 1992/1993 Typhoon. This is the best kit on the market for the Sy/Ty platform. Plenty of reading and feedback at www.SyTy.net . Specifically made hoses, tanks, wiring, instructions etc.
Modified Tank with vented cap and low level sender
Modified Pump 250+ PSI on M15 and water
Progressive controller preset for the GMC truck with horizontal panel
2 teflon lined braided hoses with pressed on ends custom length
1 Braided hose with pressed on end, collar and clamp
Pre-taped pump fittings
90 micron in-line filter
M15 15 GPH Nozzle
Mini overflow tank to replace coolant tank
And a custom relay assembly to eliminate dash interference
All wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit.
Not to be confused with a generic kit. Will not fit any other application without major modifications. If you need a vehicle specific kit, please contact us. Instructions, tip sheets, and tech support is included. 1000's of this kit have been sold.
Will support mid 10's at 126 on a single nozzle, twin nozzle upgrades are available for faster cars. Fastest 93 octane Trucks are in the lower 10's. There are some mid 10 section Tyhoons already.
Alkycontrol Methanol Injection kit for the 1991 Syclone, 1992/1993 Typhoon. This is the best kit on the market for the Sy/Ty platform. Plenty of reading and feedback at www.SyTy.net . Specifically made hoses, tanks, wiring, instructions etc.
Modified Tank with vented cap and low level sender
Modified Pump 250+ PSI on M15 and water
Progressive controller preset for the GMC truck with horizontal panel
2 teflon lined braided hoses with pressed on ends custom length
1 Braided hose with pressed on end, collar and clamp
Pre-taped pump fittings
90 micron in-line filter
M15 15 GPH Nozzle
Mini overflow tank to replace coolant tank
And a custom relay assembly to eliminate dash interference
All wiring is weather pack, split loom tubing, cable ties, connectors, heat shrink tubing, solder, etc is included with the kit.
Not to be confused with a generic kit. Will not fit any other application without major modifications. If you need a vehicle specific kit, please contact us. Instructions, tip sheets, and tech support is included. 1000's of this kit have been sold.
Will support mid 10's at 126 on a single nozzle, twin nozzle upgrades are available for faster cars. Fastest 93 octane Trucks are in the lower 10's. There are some mid 10 section Tyhoons already.
Last edited: