ViciousV6 Back from the Track (Boost Issue) Video's

[ViciousV6]

Well Guys,

We made many passes! We couldn't turn the boost over 17Lbs or it would push the crossover pipe apart and then get a pressure loss. We are going with a clamping ideal to resolve this issue.

Our best of the Day was 11.35 @ 120 MPH on 15.5-16.0 lbs of boost. The 60' was only a 1.75 too. Which i have gone better. The boost comes up quickly and was giving us wheel hop.

We also had a Twin Turbo Vette with 130,000 niles ion the motor go 9.90's on 3 passes.

I will get the videos uploaded as quickly as possible.

http://www.youtube.com/watch?v=56-NeE-Xp-w

Ralph

 

[Raist103]

Re: ViciousV6 Back from the Track (Boost Issue) Video's

nice

 

[autoaddictions]

Re: ViciousV6 Back from the Track (Boost Issue) Video's

120 thats your best MPH so far. Nice ! I thought your crossover was a vband. Hows that leaking????

 

[6UndrPressr]

Re: ViciousV6 Back from the Track (Boost Issue) Video's

nice little weld right on it will hold it..mine blew off twice until i put a small weld on 2 spots.....

 

[ViciousV6]

Re: ViciousV6 Back from the Track (Boost Issue) Video's

120 thats your best MPH so far. Nice ! I thought your crossover was a vband. Hows that leaking????

V-banded @ the bottom of turbo header but he slip jointed it under the damper. So I band clamped it and its still pushing out of the band clamp.

So either gonna V-band the joint so it doesn't leak anymore or gonna get the clamps that you weld the tab on one side and it bolts to keep it joined.

Once i try to push over 16lbs of boost it starts to loose press and turbo slows down and loose boost.

Ralph

 

[autoaddictions]

Re: ViciousV6 Back from the Track (Boost Issue) Video's

I like the weld 2 dots on the joint idea. Then you just die grind them off if they need come apart again.

 

[cloneman315]

Re: ViciousV6 Back from the Track (Boost Issue) Video's

my atrs did the same thing i used one of them band clamps and never had it happen again.