Parts needed to turbocharge a 98 jimmy/s10?

turbodig

Active member
Re: Parts needed to turbocharge a 98 jimmy/s10?

Don't do an 8cm with a 20g... get the 14.

A slightly larger converter will do fine with a 20g/14cm.

I don't think the stock turbo is such a bad choice for a low boost application. If you stay below 10psi, you're well within the sweet spot, and you'll have really good spool characteristics. A stock turbo with a slightly larger exhaust housing would be better yet, from an overall economy and driveability perspective.
 

ffmeltdown

Donating Member
Re: Parts needed to turbocharge a 98 jimmy/s10?

Don't do an 8cm with a 20g... get the 14.

A slightly larger converter will do fine with a 20g/14cm.

I don't think the stock turbo is such a bad choice for a low boost application. If you stay below 10psi, you're well within the sweet spot, and you'll have really good spool characteristics. A stock turbo with a slightly larger exhaust housing would be better yet, from an overall economy and driveability perspective.


Thanks for all the input guys! Keep it coming! One other question, would a 14cm housing spool faster in a vortec engine than a stock syty engine because of the difference in compression ratio? Thanks again everyone!!
 

clone 94

New member
Re: Parts needed to turbocharge a 98 jimmy/s10?

would a 14cm housing spool faster in a vortec engine than a stock syty engine because of the difference in compression ratio? Thanks again everyone!!

i would say yes. vortec motors have a better cam, better heads, higher compression, just an overall better breather stock for stock
 

MotorMouth

Member
Re: Parts needed to turbocharge a 98 jimmy/s10?

I'm in the process of getting parts together for this transformation as well for my 2001 ZR2 Blazer. I have picked Scott's brain on the conversion and for ideas and ffmeltdown I think you are right on for a budget set up. For those interested in the marine manifold, this will be something you should look at:

http://www.greatlakesskipper.com/productdetail.cfm?CatID=56&SubCatID=464&ProductID=9284

266 and change shipped, killer deal :)
 

UR50SLO

V6+2=LSXCamaro
Re: Parts needed to turbocharge a 98 jimmy/s10?

266 and change shipped, killer deal

Yea it is.. I paid 400 for mine... Grrrrr... Lol..
It's served me well and there's no way you could buy it new from Mercruzer cheap.

Good luck with the swap... if you need anything else give me a shout!
~Scott
 
Top