Bat relocate position

Don W.

Stab it and steer it
Wasn't sure where to put this, move if necessary.

When yuz guys relocate your bat to the bed, where do you put it and why. I'm thinkin' right rear for weight transfer and torque. Your :2cents: please...

TIA
 

4C FED

Absolutum Dominium
Re: Bat relocate position

I put mine in the right front of the bed to help balance out the weight.
 

hatrik8

Donating Member
Re: Bat relocate position

If I ever get around to doing it I will do mine in the right front also. Shorter cables and tucked up in the bed out of the way makes more sense to me. I don't know how much difference it would really make if you put it at the rear, it probably wouldn't be noticeable.
 

leadfoot

Member
Re: Bat relocate position

I'm in the process of starting this relocation. I was under the impression that the best spot would be on the passenger side, but close to the rear axle/wheel well. Perhaps some "been there done that" members can post some pics to their set up?
 

Syclone Rob

Its all ABOOT the SYTY eh
Re: Bat relocate position

This is where I put mine since I didn't want to have a longer run... Though now I need to figure out how to run my cut off switch. I used 0/1 gauge wire so that I have maximum power to the starter.


batboxrelo3sml.JPG
 

Don W.

Stab it and steer it
Re: Bat relocate position

All good ideas. Trouble is for NHRA the switch has to be at the rear so I was just gonna put the bat there to start with. Did anyone give much thought as to left or right side?
 

gkrcr882

SyTyless......for now!
Re: Bat relocate position

Might be kind of cool to put it where the spare goes, make a box and put it dead center. Come up with some kind of nifty way to make changing it less agonizing.
 

Don W.

Stab it and steer it
Re: Bat relocate position

Might be kind of cool to put it where the spare goes, make a box and put it dead center. Come up with some kind of nifty way to make changing it less agonizing.

Looked under there with that idea and just shook my head. Some of the good fab guys here could come up with something I bet.
 

It's just a six

Super Member
Re: Bat relocate position

I put mine where the spare tire goes,as much weight possible towards the back,better weight tranfer over the rear wheels.
 
Top