Is this a good kit for the 700r??

TxSy1430

New member
http://www.700r4l60e.com/store/product.php?productid=292&cat=19&page=1

"Complete description of the parts in the rebuild kit"

"Front pump"
Seal retainer
Late design seal
10-vane rotor with vanes, slide, rotor guide & pin assembly
Trans-Go steel rings & priming spring (over 5,500 rpm)
Modified pressure regulator valve
Main boost valve .500
TransGo Intermediate/reverse boost valve .300
New replacement stator support with wide bushings
Heavy Duty input shaft checkball capsule for better torque converter lockup

"Clutches, Steels And Pressure Plates"
4 Borg-Warner reverse/input clutches .078
4 Reverse/input "low drag" Turbulator steels .078
1 Reverse waved steel (eliminates the belleville spring that tears up the inside of the drum)
5 Borg-Warner forward clutches .070
5 Forward steels .090
2 Borg-Warner overrun clutches .078
2 Overrun steels .091
5 Borg-Warner low/reverse clutches .087
5 Low/reverse "low drag" Turbulator steels .068
9 Borg-Warner Hi-Energy 3-4 clutches .065
5 3-4 steels Kolene .060
3 3-4 Steels Kolene .076
1 3-4 pressure plates top .128"
1 3-4 pressure plate bottom .128"
1 3-4 snap ring .062"

Borg Warner dual cage 29 element design
Beast sunshell
Borg-Warner low/reverse roller assembly (late design)
Trans-Go (Hi-Rev) replacement forward & 3-4 release springs (good up to 7,800 rpm)
(Viton) Input/output shaft seal guarantees lube to the rear planets
Transtech paper & rubber (gasket) kit
Transmission filter (OEM) Sealed Power
Bushings (latest updates, including Teflon front pump & extension)
Thrust washer kit
Sealing ring kit
Vamac 3 lip rear seal
HD Bearing kit (Timken)
Modified Trans-Go Performance Shift kit, with all of the updates
Input Drum Reinforcement Sleeve, with modified overrun piston for the input drum
Alto Extra Wide Carbon 2-4 band with re-enforced anchor supports
Sonnax pinless forward accumulator piston & seals
New modified second accumulator piston & seals with matching accumulator springs
New "hardened" (RC52) second accumulator pin
PN8667428 second accumulator housing to replace your stock 2nd accumulator housing
Sonnax 2nd gear apply servo uses cushion springs (18% more apply area than Corvette servo)
New TransGo separator plate (predrilled, to match your setup) with "hardened" corner separator plate saver
This kit requires that the reverse/input drum to be in "perfect shape", or a new GM drum is a must.
I recommend that you Cryo your output shaft for added durability.
 

TYTILIDIE

METH HEAD
Re: Is this a good kit for the 700r??

Who is selling this, how much and what are you trying to do with your truck? Are you going cryo shafts, if so, how much?
 

TYTILIDIE

METH HEAD
Re: Is this a good kit for the 700r??

OOPS!! Just saw the link up top, not a bad deal IMO. I do know that the Borg Warner clutches are not considered high performance (Im pretty sure anyway) but I have used them with good results.
 

TxSy1430

New member
Re: Is this a good kit for the 700r??

my truck should be no more than 500hp at the crank when im done.
 

TYTILIDIE

METH HEAD
Re: Is this a good kit for the 700r??

You know they say the stock trans just isnt worth it. FWIW, I ran the 20g and highly doubt I was anywhere near 500hp, probably more like 3-350 and I was constantly breaking my trans. It wasn't my work either, we're talking broken input shafts, sun shell, planetaries, etc.. If you CAN, I'd 80e. I know its a stretch but a good idea. Are you going to build this yourself? If so, have you ever done it before?
 

TxSy1430

New member
Re: Is this a good kit for the 700r??

yes im doing it myself and will probably have some stuff cryoed.
 

turbodig

Active member
Re: Is this a good kit for the 700r??

It looks ok. You might want to price shop a bit.
I generally use the Alto clutches or the Raybestos vs. the BWs, but it's kind of a personal taste thing.
The High-end Raybestos stuff holds up a lot better under high HP applications.

Definitely cryo the output shaft. Definitely get a new reverse input drum, unless you're 100% positive the one you have is flat + true.

Your pump will likely have grooves/clearance issues. You can get a re-man, but you have to make sure to get the right pump, and check their tolerances after you get it back. Don't trust that they did it right.

I'm not so big on using shift kits and the transgo separator plate. They never realize what we have is pretty specific to what we have.

Make sure your planetaries don't have issues - bearings/pitting.

Get yourself an ATSG 700R4/4l60 manual. You'll also need some special tools, although you can make quite a few of what you need. You will need a good assortment of picks, and snap ring pliers.
 

cloneman315

Active member
Re: Is this a good kit for the 700r??

no saying you can not do it,It just seems that anyone that trys to build a 700 to last they never do,you may want to get a price from waller on builidng you one,might save you some headaches in the long run.I know there are some tricks you need to know.
 

4C FED

Absolutum Dominium
Re: Is this a good kit for the 700r??

If it has the wide band I would just replace the reverse input drum rather than reusing it. Like it says, if it's not "perfect" ie. new, you'll just be wasting your time & have to buy another band & a drum anyways.
 
Top