ScannerPro - It Works with $59 !!!!!

93 TY 2185

Donating Member
Re: ScannerPro - It Works with $59 !!!!!

Sweet
icon_cool.gif
I can't wait to get my truck out of storage to play with this.
 

2kwik4u

Resident slow guy
Re: ScannerPro - It Works with $59 !!!!!

Guess I need to get working on a nice Sy/Ty-esque dash eh?

I'll futz with that some here in the near future.

Now we just need Mark to add in some filtering, and the ability to log, and we'd be set.
 

2kwik4u

Resident slow guy
Re: ScannerPro - It Works with $59 !!!!!

SBNova said:
Mine logs.

Can you save a log file for playback later?!?!??! I thought that was one of the main problems with the setup.....If it works I'm gonna kick Jeff in the A$$ Thursday night when I'm over there. :D :D
 

SBNova

New member
Re: ScannerPro - It Works with $59 !!!!!

Yes, I have been going over my short cold start log all evening. Its mostly idling with a quick little rev, but I am using it to verify that everything is reading correctly. So far so good!! I can send it out if anyone wants to see it or try it. Just PM me an Email address.
 

TYTILIDIE

METH HEAD
Re: ScannerPro - It Works with $59 !!!!!

I downloaded Scanner Pro but cant find definitions. Where it has them in the downloads section, theres nothing there.
 

ashman

------
Re: ScannerPro - It Works with $59 !!!!!

i doubt that anyone has created one for the $58 code. there's only about 3 sy/tyer's using ScannerPro and those 3 are using $59.
 

JSM

Active member
Re: ScannerPro - It Works with $59 !!!!!

The data should still work fine. code 59 just has a few new things in data stream and no connection issues like 58.

Same def files SHOULD work though if you can get it to connect.
 

SBNova

New member
Re: ScannerPro - It Works with $59 !!!!!

I can email my definition to anyone who wants to try it on $58. Ive got the dash setup how I think I might like it, almost the same as I posted here, but I added a flag for TCC lockup, a flag for DE, in place of "Desired boost". Anyway, email me at SBNova@Yahoo.com and I will send the file to you.
 

turbodig

Active member
Re: ScannerPro - It Works with $59 !!!!!

SBNova said:
I can email my definition to anyone who wants to try it on $58. Ive got the dash setup how I think I might like it, almost the same as I posted here, but I added a flag for TCC lockup, a flag for DE, in place of "Desired boost". Anyway, email me at SBNova@Yahoo.com and I will send the file to you.


My guess is that it won't work so good on a $58 without the ALDL patch. Worth a try.
 

TYTILIDIE

METH HEAD
Re: ScannerPro - It Works with $59 !!!!!

Ill probably just wait I guess. I do have a question about 59 though. Is it going to be a physical chip malied out to people or is something we will download and then burn to a chip or load to the EMU?
 

SBNova

New member
Re: ScannerPro - It Works with $59 !!!!!

$59 is not a physical "chip" nor is it a specific bin file for you to download and run. Its an alteration of the bin file that the ECM reads and interprets in a different way. There are some starting calibrations available ( I posted one myself) as well as some software to help you change your current tune in $58 to a starting bin for $59. The Autotune software is an excel program that you copy and paste back and forth a few times while you log data, and it gets your tune very close, very fast. After your tune is close, you can elect to enable the closed loop wideband, and specify what AFR you want, wherever you want. You base tune should be as close as optimal as possible before you go closed loop, which is what the autotune helps you do. There will still be alot of tweaking in all the other tables, just as you do in $58 to get your truck to run how you want it to.
 

TYTILIDIE

METH HEAD
Re: ScannerPro - It Works with $59 !!!!!

So we still download it? Guess that explains why it has a site. Im sure everyone already knew this but I havent been following the code 59 project too closely. Now that Im into tuning, or trying anyway, code 59 is becoming appealing.
 

SBNova

New member
Re: ScannerPro - It Works with $59 !!!!!

I noticed a problem with the MAT or IAT field today while reviewing a log file. It always reads 90F or 80C. Always. I'm gonna see what I can figure out and try to get it fixed.
 

SBNova

New member
Re: ScannerPro - It Works with $59 !!!!!

IAT/MAT problem is cured. I have uploaded the new ADX to the code 59 website.

If anyone wants to give it a try on their stock sy/ty let me know and I will send it your way.
 

skwayb

NWSTP
Re: ScannerPro - It Works with $59 !!!!!

You can import the ADS file for $58 into scanner pro and then save it as an ADX file. You would just have to setup up all the gauges you want to display and all the histograms.

But like Dig said, you are gonna need the ALDL patch on your bin for it to work Correctly.
 

ashman

------
Re: ScannerPro - It Works with $59 !!!!!

question for anyone using ScannerPro/TunerPro...ok....SBNova :) ... do you see a increase/decrease in ALDL data rate when you resize the window?

I see a substantial decrease in data rate when the window size is increased. Granted I'm using and older laptop (1Ghz/512MB w/Geforce2go 32MB video).
 

SBNova

New member
Re: ScannerPro - It Works with $59 !!!!!

I will try to test it this weekend. I took a look at a log file last night and it showed ~2.3hz at playback, no matter what size the window was.
 
Top