Which drag tires for my new Sawblades?! ---

alwayscode390

pppssssshhhhhtttttttttttt
I am new to the drag tire game. I just scored a set of vette' c4 sawblade wheels in 17 x 9.5" . I need tires I can drive LEGALLY to the track on the highway about 25 miles.....does that mean I need drag radials? These will only be used at the track ... and to and from the track once a week.

I want the BIGGEST tire I can fit ... right now my rears are the 315/35/17's on zr1's so a tire around that size (diameter) will work best for me (or a little taller but obviously not as wide ) ... THANKS for your time and help . What size/brand do you recommend?! ---


* EDIT the tires on the wheels right now are 275/40/17's , just an FYI incase you needed to know that *
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Which drag tires for my new Sawblades?! ---

The camaro guys are telling me stay with the 275's ... that way I can swap from the Sy to the z28 ... and go with Mickey Thompson Drag Radials.....any opinions? ---
 

sy#2921

BAMF
Re: Which drag tires for my new Sawblades?! ---

I run four bfg drag radials in 275/40/17's on my truck and I love the setup. They hook really nice without doing a burnout. I was thinking of doing mickey's all around but they told me that it was very unsafe for front applications that you will be driving on the street
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Which drag tires for my new Sawblades?! ---

OOOH good advice.....I will take that into consideration because I am a BFG diehard fan :) ---
 

Six-is-Enough

Use to do a little Boost
Re: Which drag tires for my new Sawblades?! ---

I run BFG Drag Radials 255/50's on my track rims also. No problem with them going back and forth to the track, but they do require some heat for them to work best at the track on my truck.:2cents:
 

SlayerTy

New member
Re: Which drag tires for my new Sawblades?! ---

Mickey Thompson ET Streets all the way! They are basically street slicks that are DOT approved. They are a little pricey considering you have to buy tubes for each one, but if you want the best traction these are the tires you should get. I had a set on my 1996 T/A. They work great just as long as you don't plan on driving in the rain. You won't ever have a traction problem with these tires!
 

Flyin Ryan

hated cuz he drives fords
Re: Which drag tires for my new Sawblades?! ---

Mickey Thompson ET Streets have always worked out great for both me and my little brother on our mustangs.. My little brother even daily drives his mustang with his et streets.. they do blow in the rain but what do yea expect.
 

ChevelleDude71

Lo Boost
Re: Which drag tires for my new Sawblades?! ---

I had the MT Sportsman S/R Tires on my chevelle, which with the BFG's before it would loose it through first...second...and most of third, But after I put those on the car hooked pretty good. I would buy them again. The difference with these is that they get good traction in the rain also...Just my :2cents:
 

James Thomas

"NO CLASS"
Re: Which drag tires for my new Sawblades?! ---

If they have a size that you can use, M& H Racemaster! Been using them for 26 years and I like them better than M/T's.

_________________
James
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Which drag tires for my new Sawblades?! ---

You guys have given GREAT advice. Now I will figure out if I want to trust having 4 slicks on a truck that may see rain on the way home from the track, lol. I appreciate it :) ---
 
Re: Which drag tires for my new Sawblades?! ---

James Thomas said:
If they have a size that you can use, M& H Racemaster! Been using them for 26 years and I like them better than M/T's.

_________________
James

There's these

http://www.mandhtires.com/store.php?crn=70&rn=294&action=show_detail

Drag Radials : (e) 275/50R17
(e) 275/50R17 Watch Video

DOT Certified

TUBELESS

Comparable Race Size 9.0/28.0R17

Tread Width: 8.8"
Section Width: 10.7"
Diameter: 28.0"
Circumference: 88.0"
Rim Size: 9.0"
<li>Code: ROD-06R *(NOTE) TIRES ARE ONLY SOLD AS PAIRS. YOU MUST PUT AT LEAST 2 IN THE QUANTITY BOX.*
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Which drag tires for my new Sawblades?! ---

Just thought of a question....will I have a problem running the MT's on the rear and the BFG's/m&h on the front ?! That may be the setup I go with :) (or all m&h or all bfg) ---
 

SlayerTy

New member
Re: Which drag tires for my new Sawblades?! ---

alwayscode390 said:
Just thought of a question....will I have a problem running the MT's on the rear and the BFG's/m&h on the front ?! That may be the setup I go with :) (or all m&h or all bfg) ---

I don't think you would have any problems. Except the truck will get a little squirley in the rain.
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Which drag tires for my new Sawblades?! ---

Thanks :) ... I HOPE it doesnt see rain with those tires, but I want to be ready if I do, lol .

Is anyone just running REAR drag radials without any problems? I am not really putting down enough power for fronts quite yet, unless they help anyway ---
 

Silly

Banned
Re: Which drag tires for my new Sawblades?! ---

I ran 245 nitto drag radials all around on my truck and loved it, had no problems in the rain either. That was the Ty not the Sy, never had the syclone in the rain with those on it.
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: Which drag tires for my new Sawblades?! ---

Thanks for the words bro...because the Nittos are actually the cheapest tire I have found so far. The M&H seem interesting to me though....its like an old skool drag racer secret brand ;) , hahaha jk jk ---
 

turbodig

Active member
Re: Which drag tires for my new Sawblades?! ---

I've got 245 hoosier quicktimes on 15" welds on all 4.

If I had it to do over again, I'd probably do the M/T Drag radials.

One thing to note...

Given 2 tires of the same rim size and overall height, a wide (say, 315) tire will have the exact same contact patch as a narrow tire (like a 245). Often, a narrower tire fits better into the groove of a drag track (particularly in the case of radials).

later,
 

Silly

Banned
Re: Which drag tires for my new Sawblades?! ---

alwayscode390 said:
Thanks for the words bro...because the Nittos are actually the cheapest tire I have found so far. The M&H seem interesting to me though....its like an old skool drag racer secret brand ;) , hahaha jk jk ---


Hell if you want a "super secret brand" look into dirt boz tires LOL

They are dirt tires with decent sized nubs on them but hook like no other, seen many deep 9 second cars dead hook on the street with them, haven't seen them on an AWD vehicle though.

IMHO nittos would be more than enough but the M/T is the superior brand.
 

Six-is-Enough

Use to do a little Boost
Re: Which drag tires for my new Sawblades?! ---

alwayscode390 said:
Thanks for the words bro...because the Nittos are actually the cheapest tire I have found so far. The M&H seem interesting to me though....its like an old skool drag racer secret brand ;) , hahaha jk jk ---

I don't know about the nitto's. I had a LS1 Camaro with nitto's and they took alot of heat in them to work good. Which could be a problem with our trucks.
 

SY1616

Donating Member
Re: Which drag tires for my new Sawblades?! ---

I just bought the Nitto DR and LOVE them. To me, the BFG looks dates andit way too soft and gummy....sorry :) Nittos look better too IMHO.
 
Top