George Blake
DONATING MEMBER
Re: Anyone ever deal with?
Do you want a 32 spline input shaft for the T-case so you can run a 32 spline output shaft on the trans? Click on the link in my signature. Some guys have twisted off the 27 spline setups. Use all the stuff for the regular 700 to th400 swap if you did a kit, but use the 32 spline 4x4 output shaft from the 400. This way there's no issue with welded or cut down shafts. You will NOT break this setup.
The TH400 had a 7" long 4x4 shaft and a 9" long 4x4 shaft. It will depend on which adaptor you got to determine which shaft you'll need.
If you want to go this route, let me know which setup you got and I'll get you some more specific dimensions.
Do you want a 32 spline input shaft for the T-case so you can run a 32 spline output shaft on the trans? Click on the link in my signature. Some guys have twisted off the 27 spline setups. Use all the stuff for the regular 700 to th400 swap if you did a kit, but use the 32 spline 4x4 output shaft from the 400. This way there's no issue with welded or cut down shafts. You will NOT break this setup.
The TH400 had a 7" long 4x4 shaft and a 9" long 4x4 shaft. It will depend on which adaptor you got to determine which shaft you'll need.
If you want to go this route, let me know which setup you got and I'll get you some more specific dimensions.