I want my cladding painted on my SY ---

alwayscode390

pppssssshhhhhtttttttttttt
I was curious as to what you guys pay to get your sy cladding painted black to match the truck? My paint is in GREAT shape.... so getting a full repaint would suck , unless it was only a little bit more $$$.

Thanks ---
 

Foot Performance

Donating Member
Re: I want my cladding painted on my SY ---

I was curious about this to i dint really want to paint my cladding becuase my truck is low mileage and mostly origanal but it is such a P I A to keep it all the same sad and when you wash it you have to start all over
 

SY1616

Donating Member
Re: I want my cladding painted on my SY ---

Me too......:) :rotf:
 

Attachments

  • 1616-6.jpg
    1616-6.jpg
    46.6 KB · Views: 0
  • 1616-3.jpg
    1616-3.jpg
    50.5 KB · Views: 0

alwayscode390

pppssssshhhhhtttttttttttt
Re: I want my cladding painted on my SY ---

"You too" what? Your cladding looks SPECTACULAR ... did you pay to get it that way , or buy it that way!? ---
 

dgoodhue

BuSTeD 4.3
Re: I want my cladding painted on my SY ---

Me too. Mine looks great if I put the effort in but it looks like crap a couple day later. I want to keep a matte finish.
 

Ross L

Member
Re: I want my cladding painted on my SY ---

I like my cladding about 1-2 washes *after* applying "back to black". It's too shiney at first and loses a little shine after a wash or two. Just my opinion of course. 1616's truck does look GREAT with the painted cladding! Is the cladding more prone to chipping after being painted?
Ross
 

phoonTy

Truckless. For now.
Re: I want my cladding painted on my SY ---

So no one has a price on getting cladding painted? :lol:
 
Re: I want my cladding painted on my SY ---

alwayscode390 said:
I got a PM saying $2k !!! ---

That's a little steep. Does that included them R&R the cladding? If so, then I think that's a fair price. You could save yourself a ton of money by prep'ing it to 400grit yourself. It can be a PITA to remove, but the biggest issue is getting all the back to black and black chrome off. If you've applied a lot of that stuff over the years, which it sounds like most of you have, then the paint will most likely fisheye with only a few hits with grease and wax remover. Make sure you give the shop a heads up on that so they can clean it 3 or 4 times and put it under the heat lamps to get the silicone in the back to black to the surface. If they have to paint and repaint the cladding a few times, you'll be paying more than $2K. :tup:
 

phoonTy

Truckless. For now.
Re: I want my cladding painted on my SY ---

vanillagorilla said:
That's a little steep. Does that included them R&R the cladding? If so, then I think that's a fair price. You could save yourself a ton of money by prep'ing it to 400grit yourself. It can be a PITA to remove, but the biggest issue is getting all the back to black and black chrome off. If you've applied a lot of that stuff over the years, which it sounds like most of you have, then the paint will most likely fisheye with only a few hits with grease and wax remover. Make sure you give the shop a heads up on that so they can clean it 3 or 4 times and put it under the heat lamps to get the silicone in the back to black to the surface. If they have to paint and repaint the cladding a few times, you'll be paying more than $2K. :tup:

what if your cladding is grey? :lol: :tup:
 

alwayscode390

pppssssshhhhhtttttttttttt
Re: I want my cladding painted on my SY ---

vanillagorilla said:
That's a little steep. Does that included them R&R the cladding? If so, then I think that's a fair price. You could save yourself a ton of money by prep'ing it to 400grit yourself. It can be a PITA to remove, but the biggest issue is getting all the back to black and black chrome off. If you've applied a lot of that stuff over the years, which it sounds like most of you have, then the paint will most likely fisheye with only a few hits with grease and wax remover. Make sure you give the shop a heads up on that so they can clean it 3 or 4 times and put it under the heat lamps to get the silicone in the back to black to the surface. If they have to paint and repaint the cladding a few times, you'll be paying more than $2K. :tup:

Yeah, that quote included them taking off the cladding, prepping it, then painting it ... and reinstalling it. I may take it off and prep it myself after hearing your advice ;) ... thanks ---
 
Re: I want my cladding painted on my SY ---

phoonTy said:
what if your cladding is grey? :lol: :tup:
Well provided there aren't any knicks or dings and the paint is on there well (ie no cracking or flaking), then cut that price in half. It wouldn't take much to scuff it up and shoot it, then clear it.
 

Bump Stick

Get me the BIG hammer
Re: I want my cladding painted on my SY ---

OK my question to add to this is what about having the calddng and the whole truck repainted, about how much would that run?
 

SY1616

Donating Member
Re: I want my cladding painted on my SY ---

I was quoted $2,500 on my first sy to have its cladding painted. I bought my third one already done that way....looks delicious indeed!!!
 

dgoodhue

BuSTeD 4.3
Re: I want my cladding painted on my SY ---

vanillagorilla said:
You could save yourself a ton of money by prep'ing it to 400grit yourself. It can be a PITA to remove, but the biggest issue is getting all the back to black and black chrome off. If you've applied a lot of that stuff over the years, which it sounds like most of you have, then the paint will most likely fisheye with only a few hits with grease and wax remover. Make sure you give the shop a heads up on that so they can clean it 3 or 4 times and put it under the heat lamps to get the silicone in the back to black to the surface.

For that reason, my truck has been Black Chrome free. I used one silcon product once on my Sy, before seeing a post about silicon product making the cladding difficult ot paint.
 

turbodig

Active member
Re: I want my cladding painted on my SY ---

dgoodhue said:
Me too. Mine looks great if I put the effort in but it looks like crap a couple day later. I want to keep a matte finish.


I got mine repainted with the factory finish (Per the bulletins). I waited a couple months, and zaino'd it. It stays perfect, now, even after a wash.

Not really matte, but not a full gloss, either. Looks a lot like fresh black chrome without the streaks. :)

If I had it to do over again, I'd do it myself.... little niggly things in the paint job I don't like.
Only person who ever notices is me, when I'm waxing.

Was about $1200, as I recall, but I had some other work done as well. $2k is crazy.

Do yourself a favor, take yours off and do the prep, if not the whole thing. As somebody who cares about the vehicle, you'll do a far better job than a commercial shop will have the time to do.
 

DaveP

Active member
Re: I want my cladding painted on my SY ---

alwayscode390 said:
I got a PM saying $2k !!! ---
This seems like a good deal. It's enough, that if something goes 'wrong' they have enough to make, that they will go the extra to fix it. You should get a good job for this price.

I've painted 3 sets of cladding. For those of you who haven't, you have NO idea of what a royal pain in the ass this project is, if you want it to come out well.

I have a set of fixtures that hold the pieces. (6 hours to construct these). Basicly, its remove, wash/clean, de-wax, sand to 320, repair cracks/tabs, apply "Bull-Dog", apply NCT540 hi-build primer, sand to 320, fill imperfections with 'blue' 3M, sand as needed, clean and degrease, prime with DP40, sand to 400 or better. Wash only, color coat with 3 coats of DBU, followed with 2-3 coats of 2020 & 2026 (flat-clear) clear coat. Let dry for a day, and reinstall.

You need a large work area to be able to lay all the parts out. You need to know how to paint, and own the equipment. You need to be able to spray in the open without being concerned about where the overspray is going. (Onto your neighbors' cars). It takes me about two weeks, working steadilly in the evenings (sanding) and 2 nice days (painting). Not to mention the materials cost is about 500.00 alone.

Trust me, $2,000 for a good job is a DEAL.

DaveP
 

jimmm27

New member
Re: I want my cladding painted on my SY ---

I am looking for the paint code for the argent gray on my 92 ty the car is white and gray but it looks like the previous owner spray painted the cladding and i want to make it look like new again
can anyone help me
 
Top