Typhoon Engine plates... Painted or Standard

UR50SLO

V6+2=LSXCamaro
Hello guys... :)

I've got some of the Typhoon Engine plates left.... I need to get Heather's Typhoon back on the road here in the next month and need to come up with the funds to finish it.

Thre is 3 ways to purchase these:

Not polished.. as CNC Cut... for 45.00 shipped

Sanded and polished for 50.00 shipped

Painted letters: Satin or Polished for 80.00

Or painted with any color you desire (Base coat clear coat with epoxy to bond it to the alluminum forever)

I will need the paint code or color your wanting the colors to be (where it says Typhoon and 4.3L Turbo)

I've been waiting awhile before posting again.. I think everyone that purchased one from me the first time around was happy with the quality and how quick I got them out.

Thanks alot for your support, Scott,Heather and boys.~:tup:

Please send me a E-mail Since I don't check PM's much UR50SLO@aol.com :tup:

Pictures of Plate: ANY COLOR!!!!! This one is factory Gold "Typhoon" and black.

MarioPlate.JPG


Not a good picture but this one is painted.. I'll get another one tonight and post.
Typhoonengineathomecoming.JPG


paintedTYplate.JPG
 
Last edited:

turbodig

Active member
Re: Typhoon Engine plates... Painted or Standard

UR50SLO said:
Hello guys... :)

Final PlateJPG.JPG

Could also be drilled for gold chain, for the perfect accessory for an orange jumpsuit.
Be the shizzle at your next block party.


;)
 

turbodig

Active member
Re: Typhoon Engine plates... Painted or Standard

warmpancakes said:
shit im thinking belt buckle

Yeah. Nothin' sez "I got yer rodeo right *here*" like a Ty belt buckle.

Maybe Ty brass knuckles.

Or even a whole line of kitchen accessories... It'd make a great bacon press.
 

NecroWolf

lost marbles member
Re: Typhoon Engine plates... Painted or Standard

turbodig said:
Yeah. Nothin' sez "I got yer rodeo right *here*" like a Ty belt buckle.

Maybe Ty brass knuckles.

Or even a whole line of kitchen accessories... It'd make a great bacon press.


:rotf: :rotf: :rotf: :rotf:

so are these weld in or bolt on or glued/epoxed? i thinking i want one
 

UR50SLO

V6+2=LSXCamaro
Re: Typhoon Engine plates... Painted or Standard

I would not reccomend epoxy on the belt buckle :) Lol..

No.. they come with instructions and 2 part epoxy. You could 3M Double sticky tape if desired
The Epoxy is kind of perminate... that stuff is tough!

Thanks guys!
~Scott
 

NecroWolf

lost marbles member
Re: Typhoon Engine plates... Painted or Standard

oooh double sticky tape, cuold i just use duct tape?
 

Loeryder

New member
Re: Typhoon Engine plates... Painted or Standard

or you could mill out the oem syclone plate and then have this plate welded in, smoothed out and powdercoated...

who would go thru all that? lol
 

warmpancakes

New member
Re: Typhoon Engine plates... Painted or Standard

Loeryder said:
or you could mill out the oem syclone plate and then have this plate welded in, smoothed out and powdercoated...

who would go thru all that? lol

I was thinking that,
 

UR50SLO

V6+2=LSXCamaro
Re: Typhoon Engine plates... Painted or Standard

I think one guy was actually planning on doing that... whew... lots of work :)

Of course I'm totaly re-designing the stock upper plenum to use a single 80mm throttle body in the front and welding everything else up. So Yea.. maby I'm a little nuts too. ;)
~Scott

Some of that 3M tape is super good. No pun intended.. But the epoxy is forever.
 

NecroWolf

lost marbles member
Re: Typhoon Engine plates... Painted or Standard

UR50SLO said:
Of course I'm totaly re-designing the stock upper plenum to use a single 80mm throttle body in the front and welding everything else up. So Yea.. maby I'm a little nuts too. ;)
~Scott
pictures????
 

UR50SLO

V6+2=LSXCamaro
Re: Typhoon Engine plates... Painted or Standard

The upper plenum is at the shop doing the milling and adaption for the single 80mm throttle blade.

I hope to have it back in a few weeks. I really didn't like the way it was designed and Heather won't

let me do a carb/efi setup on the truck.... So I had to come up with a way to ballance the air flow in

the stock Plenum and make it more effecent.

I'll post pic's when I get it back for sure. ;)

~Scott
 

NecroWolf

lost marbles member
Re: Typhoon Engine plates... Painted or Standard

i like the one mike is fabbing, i think its mike renz atleast, looks like a a grand national upper.
 

UR50SLO

V6+2=LSXCamaro
Re: Typhoon Engine plates... Painted or Standard

I do too for sure.... Heahter won't let me change from the stock plenum so I'm stuck modding the one I have. Believe me if I had the chance I'd do Renz's upper or a carb style that I already have here.
That's the only reason I'm doing what I am!
~Scott
 

UR50SLO

V6+2=LSXCamaro
Re: Typhoon Engine plates... Painted or Standard

Digg'n up a old thread.....

Anyone still wanting one of these I've got about 30 or so left...

E-mail UR50SLO@aol.com

Thank you,
Scott~
 

UR50SLO

V6+2=LSXCamaro
Re: Typhoon Engine plates... Painted or Standard

Thank you for the orders... here's one custom plate going out today!

Thank you for the order Mario!
~Scott
MarioPlate.JPG
 

Mario65

Hotrodicus Supersonicus
Re: Typhoon Engine plates... Painted or Standard

Thank you for the orders... here's one custom plate going out today!

Thank you for the order Mario!
~Scott
MarioPlate.JPG

MAN! thats strong!

Thats gold to match the stock gold decals

I have some paypal money so Ill send it when I get home

thanks
 
Top