Is it possible to be too rich resulting in a lean condition?

Flyin Ryan

hated cuz he drives fords
Basically want to know if my fuel pressure is too high resulting in the truck being super rich, will the ecm compensate and lean it out?

I am asking because in dm and on my wideband im crazy lean for some reason but my fuel pressure is 50 base and rises with boost fine.. plus I don't know if it's in my head or not but I think I smell a little fuel from the exhaust cutout which would mean im rich right?

no black or colored smoke at all out of the cutout at all either and I haven't had time to lean out the fuel pressure or raise it some more and datalog but plan to this weekend maybe and wanted to go in knowing all I can before hand

also truck runs like total crap in open loop but is fine in closed loop but is reading lean if that helps at all and im going to also do an open air recal on my wideband and see if the readings change to more normal readings.

so thanks in advance for answering my stupid question :)

**edit**

also want to add that im not getting anything over 2 or 3 kr in datamaster as well.. only really during up shifts but with as lean as it's saying I don't get it.
 

turbodig

Active member
Re: Is it possible to be too rich resulting in a lean condition?

That says to me that your wideband isn't telling the truth.

Compare it against stock o2 volts, and see if they agree.

Is it an Innovate WB?
 

Flyin Ryan

hated cuz he drives fords
Re: Is it possible to be too rich resulting in a lean condition?

turbodig said:
That says to me that your wideband isn't telling the truth.

I would normally agree but datamaster's showing Sterm's in the 140's to mid 160's which I believe is pretty lean right?

turbodig said:
Compare it against stock o2 volts, and see if they agree.

How can one tell what volts each is putting out? Im guessing with a multi meter you mean? or did you mean within dm with the mv? the mv's are eratic like normal but reach the 900's under throttle

turbodig said:
Is it an Innovate WB?

Yes sir, an LM1... sensor's maybe six months old and hasn't ever seen Leaded gas

ALSO what brought me to think that i could possibly be too rich causing lean conditions thanks to the ecm is the fact that it seems on both dm and the wb that when I get out of the throttle (normal driving) AFR's shoot down showing normal richer readings for a few seconds then jump back to lean numbers :crazyeye:
 

Flyin Ryan

hated cuz he drives fords
Re: Is it possible to be too rich resulting in a lean condition?

recal'd the wb and adjusted fuel out of the afpr and now my Sterm's in dm are much better and the wb is showing 14 or 15ish at idle but didn't get a chance to take i out and see what afr's I get with boost yet.
 
Top