Moates Adapter w/eprom $31 shipped

Sy Guy 0024

Member
Like new Moates adapter with 27SF512 eprom. $31 shipped.

DSC03998.jpg
 

T-Bone

Active member
Re: Moates Adapter w/eprom $31 shipped

Dibs.....have to check this evening and see if this is the piece I need.
 

QWERTYphoon

Motley Driver Award 2009
Re: Moates Adapter w/eprom $31 shipped

You will need a lot more than this if you are going to beat Jeremy or Jeff. I don't think this will work on a Z06?
 

T-Bone

Active member
Re: Moates Adapter w/eprom $31 shipped

You will need a lot more than this if you are going to beat Jeremy or Jeff. I don't think this will work on a Z06?

Thanks. Since you appear so knowledgeable, do you think it might work on a Kubota ZD-28???
 

T-Bone

Active member
Re: Moates Adapter w/eprom $31 shipped

Well, place it on the market again. I doubt it will work in my Prompaq after closer inspection.
 

JSM

Active member
Re: Moates Adapter w/eprom $31 shipped

Well, place it on the market again. I doubt it will work in my Prompaq after closer inspection.

You are probably the last person to use a prompaq. They were/are not very reliable FYI and there is a lot better solutions out there now that take up 1/10th the space.

:tup:

Order a G3, remove prompaq and have atleast room for 10 chips not the 4 or whatever prompaq had.
 

T-Bone

Active member
Re: Moates Adapter w/eprom $31 shipped

You are probably the last person to use a prompaq. They were/are not very reliable FYI and there is a lot better solutions out there now that take up 1/10th the space.

:tup:

Order a G3, remove prompaq and have atleast room for 10 chips not the 4 or whatever prompaq had.

Believe it or not, yesterday I put it in the Sy and it would not even start with any of the 4 performance chips it came with so I put the open loop chip in (which was in the original ECU ) and the custom (specific for that truck) chip that I was sent after I bought the truck. It fired up on the custom specific chip, NO check engine light, and it spools real strong and the ONLY thing out of tolerence is that it acts like it wants to die out at idle, then surges back, then goes to die, then surges again but give a little gas and everything is fine. I revved it up to 4500 rpm.....before, I had a black spent fuel patch on the concrete at the exhaust exit....now nothing! Only thing I got yesterday was four wide 6' long peel marks on my concrete drive now for my wife to complain about :(. I want to datalog it with Jimmy and check everything with the PLX wideband in use, which is going in this morning. I am pretty confident I lucked up and will have way more to feed Jeremy than he ever intended to swallow. I still get a grin everytime I think of what he said....."BTW, $$$$$ won't fix your problem". I gotta hand it to him though; he got me off my laurels and motivated me regarding the Sy!!!!! I feel pretty good about it!
 

turbodig

Active member
Re: Moates Adapter w/eprom $31 shipped

Believe it or not, yesterday I put it in the Sy and it would not even start with any of the 4 performance chips it came with so I put the open loop chip in (which was in the original ECU ) and the custom (specific for that truck) chip that I was sent after I bought the truck. It fired up on the custom specific chip, NO check engine light, and it spools real strong and the ONLY thing out of tolerence is that it acts like it wants to die out at idle, then surges back, then goes to die, then surges again but give a little gas and everything is fine. I revved it up to 4500 rpm.....before, I had a black spent fuel patch on the concrete at the exhaust exit....now nothing! Only thing I got yesterday was four wide 6' long peel marks on my concrete drive now for my wife to complain about :(. I want to datalog it with Jimmy and check everything with the PLX wideband in use, which is going in this morning. I am pretty confident I lucked up and will have way more to feed Jeremy than he ever intended to swallow. I still get a grin everytime I think of what he said....."BTW, $$$$$ won't fix your problem". I gotta hand it to him though; he got me off my laurels and motivated me regarding the Sy!!!!! I feel pretty good about it!

Hmmm... sounds like different size injectors.

Prompaq, as I recall, had sockets to put just the EPROMs in, as long as one of the slots had the Memcal in it.
 

Sy Guy 0024

Member
Re: Moates Adapter w/eprom $31 shipped

I believe if you look back through all the off-topic posts, he already passed on it. I'll PM you my info. Thanks.
 
Top